557352

Tusa Buoyancy Compensator Jacket Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
metal slider out through the slot. Reinsert the metal slider into the new slot with
the same procedure.
(3) (Fig. 13) shows the anchor belt after adjustment. If the metal slider comes out, the
BCJ may be pulled back by the weight of the tank and slide down. Be sure to
check that the metal slider is securely fastened.
1. Thread the cam buckle as shown in Figure (14 to 16).
2. Slide the backpack onto tank to desired position.
3. Cam belt should now be positioned as shown
in Figure 17. Pull firmly on end of the belt until
all slack has been removed.
4. Once again check that the backpack is at desired position on tank.
5. To prevent slack of the belt while buckle is
lifted, mate the Hook and Loop fastener on the
belt once in this timing. (Fig. 18)
11
GB
(Fig. 14) (Fig. 15)
THREADING AND ADJUSTING TANK BELT
(Fig. 16)
10
(Fig. 17)
(Fig. 18)
Adjusting the tightness around the arm hole. (BCJ-9300, 5560, 3860)
(1) There are two adjustment slots on the waist support panel. If you feel the shoulder
strap too tight or too loose against your shoulder / arm, you can adjust by
attaching the shoulder strap into another slot.
(2) Move the metal slider to desired slot. Outer slot for wider fitting, inner slot for
tighter fitting. Simply pull on, turn parallel, and slant the metal slider . Pull the
Cummerbund Adjustment
(1) Peel off the Hook & Loop fastener of the rear end of cummerbund which has been
folded back through the appropriate slot of the waist support panel. Adjust the
length and then close the Hook & Loop fastener. (Fig. 10)
(2) If you must make a major adjustment in length, use a different slot in the waist
support panel. (Fig. 11, 12)
(Fig. 10)
(Fig. 12)(Fig. 11)
(Fig. 13)
Following procedures to be performed before every dive:
1. Check the Rapid Exhaust Valve threaded fitting, and make sure they are tightened
down properly.
2. Inflate B.C.J. until it feels firm. Let stand for 30 minutes. If the bag is not as firm as
when inflated, do not use. Return B.C.J. to the nearest TUSA Dealer for inspection
and/or repair.
3. It is important to have the APA system serviced every 12 month or after 100 dives
(whichever comes first). Please see authorized dealer for overhaul.
PRE-DIVE INSPECTION
BCJ(CE)002-021 GB 10.11.17 9:35 AM ページ 10
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tusa Buoyancy Compensator Jacket at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tusa Buoyancy Compensator Jacket in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info