804673

Turbionaire Feel 60SB4 Manual

18
Zoom out
Zoom in
Previous page
1/64
Next page
Pans do not
become hot and
appears in the
display.
The induction hob cannot
detect the pan because it is
not suitable for induction
cooking. The induction hob
cannot detect the pan because
it is too small for the cooking
zone or not properly centred
on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the right
cookware’. Centre the pan and make sure
that its base matches the size of the
cooking zone.
The induction hob or a
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault. Please note down the error letters and
numbers, switch the power to the induction
hob off at the wall, and contact a qualified
technician.
NOTE: Never attempt to disassemble the unit by yourself.
FAILURE DISPLAY AND INSPECTION
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
ERROR CODE Description
UNo pot or No appropriate pot, please put the appropriate pot;
Temperature sensor of the induction coil failure
Temperature sensor of the IGBT failure.
Abnormal supply voltage.
High voltage(Above 270±10V)
Low voltage(Below 180±10V)
There is a protection that when dry burning or high temperature on the surface
of the heating stove.
The fan don't work or is blocked ,then can not dissipate heat.
NTC failure (NTC sensor fail which can't detect the temperature varaible). NTC is
thermistor, which is placed in the middle of the coil ofinduction hob, like a wire
in the shape of a mushroom head, used to sense temperature.
The above are the judgment and inspection of common failures. Please do not disassemble the unit by
yourself to avoid any dangers and damages to the induction hob. EN-18
F3/F4
F9/FA
E1/E2
E3
E5
d0
O1 The induction coil without screw or the the screw is loose.
E0 An error occurred in the communication between the control board and the main
board
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Turbionaire Feel 60SB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Turbionaire Feel 60SB4 in the language / languages: English, Italian as an attachment in your email.

The manual is 4.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info