615563
11
Zoom out
Zoom in
Previous page
1/52
Next page
GB
OWNER’S MANUAL
GO RUN 10
11
in for repair, as it’s usually sufficient
to replace the defective part. Always
give the model, serial number of your
equipment and in case of malfunctions
also conditions of use, nature of
malfunction and any error code.
When you encounter unusual behavior
from the treadmill, simply turn the power
switch off, wait 1 minute and turn the
power switch on to reset the treadmill.
This should clear incidental errors and
ready the treadmill for normal operation
again. If after you have reset the
treadmill by turning the power switch off
and on again, and the treadmill is still not
operational, contact your local Tunturi
dealer for service.
If you require spare parts, always
give the model, serial number of your
equipment and the spare part number
for the part you need. The spare part list
is at the back of this manual. Use only
spare parts mentioned in the spare
part list.
ERROR CODES
The user interface will display
information about operational faults.
E1: Speed sensor error.
Unplug the electrical cord from the wall
outlet and from the treadmill, wait 1
minute and turn the power switch on
again. If treadmill recovers to normal
operation, you may continue to use the
treadmill. Otherwise, call the dealer for
service.
E6, E7: Lift motor error.
Unplug the electrical cord from the wall
outlet and from the treadmill, wait 1
minute and turn the power switch on
again. If treadmill recovers to normal
operation, you may continue to use
the treadmill.
PROTECTIVE CIRCUIT
The machine will shut off when the
electricity load is above the machine’s
capacity. To restart the machine, please
follow the procedure below:
Unplug the power cord from the
machine’s socket.
Push in the safety switch.
Replug the power cord into the
machine’s socket.
NOTE!
DON’T PUSH IN THE SAFETY
SWITCH BEFORE UNPLUGGING THE
MACHINE’S POWER CORD.
If you leave the treadmill plugged in
after turning off the console, there will
still be current running to the console.
This treadmill is equipped with a safety
control program that will automatically
shut down the machine after six hours of
no use. In the event of an automatic shut
down, please follow the procedure below
to restart the treadmill: A. Unplug the
power cord form the machine’s socket.
Replug the power cord cord into the
machine’s socket to restart the machine.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tunturi GO Treadmill 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tunturi GO Treadmill 10 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info