Manual Truma Saphir Vario (page 19 of 68) (English, German, Dutch, Danish, French, Italian, Spanish)

489374

Zoom out

Zoom in

1/68

Cold air distribution and circulating air

return feed

Cold air distribution

A KR 65 Ø 65 mm (8) cold air duct with at least one outlet

must be connected to each of the three cold air emitters of

the unit (5, 6 and 7).

Slide the cold air ducts (8) into the cold air emitters of the unit

and route to the air outlet nozzles. Truma can supply a sound

muffler for installing in the cold air system (part no. 40040-

60100) as an accessory for reducing the noise level.

The RL rectangular air outlets (part no. 40280-01) with the

ANH connecting piece (part no. 40920-02) are particularly

suitable for use as cooled air outlets into the vehicle interior.

The cold air distribution system is individually designed

for each vehicle model using a modular principle. A wide

range of accessories is available for this purpose.

In order to achieve the best possible cooling power, we

recommend:

Route cold air pipes to air vents as short and straight as

possible.

The total accumulated length of cold air duct that may be

used is 15 m.

Connect the longest cold air duct (max. 8 m) to the marked

cold air outlet (q), since this has the most air throughput.

To prevent condensation, do not route cold air ducts in the

vicinity of incoming outside air (or behind the refrigerator).

–

Circulating air return

The circulating air is drawn in again by the unit, either through

an additional rectangular air grille (1 – part no. 40040-29200)

or 3 round air grilles (part no. 40040-20400), e.g. in the stow-

age box wall or via several smaller openings with a total area

of at least 300 cm².

Important note

To ensure trouble-free air exchange, the air infeed from the

interior of the vehicle to the installation location must be

located in the immediate vicinity of the device. If appropri-

ate, covers are to be fitted, in order to avoid the circulating air

return being impeded by stowed objects.

If the equipment cannot be installed in close proximity,

Truma can provide a flexible air intake (part no. 40090-

59100) as an accessory.

Installing the infra-red receiver

The receiver (9) is to be fitted for preference on the clothes

cabinet in such a way that the remote control can be pointed

at it without any hinderance (length of connection cable 3 m).

If necessary, a 3 metre cable extension can be supplied

(part no. 40090-89100).

If the receiver cannot be flush-mounted, Truma can

provide an on-surface frame (10 – part no. 40000-52600)

as an accessory if required.

Drill a hole 55 mm in diameter. Lead the cable through from

behind and secure the receiver with 4 screws (11). Then at-

tach the cover frame (12), route the cable to the air condition-

ing unit and connect to the unit at the side.

Ø 55 mm

Truma offers side parts (13) in eight different colors for

finishing the cover frames (12) in a visually pleasing way.

Please ask your dealer.

Hi there was one of these installed when we bought the van but it doesn't blow ice cold air? what could be wrong?? Submitted on 26-2-2023 at 14:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Saphir Vario in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 10,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Saphir Vario Manual

Product: