Manual Truma Mover Mover TE R4 (page 20 of 84) (English, German, Dutch, Danish, French, Italian, Spanish)

484649

Zoom out

Zoom in

1/84

Installation of the drive units

The frame of the vehicle must be kept free of rust and heavy

soiling and without any damages to the suspension

components.

The wheels and tyres that are fitted to the caravan must be of

the same size and model and inflated as per the manufacturer’s

instructions.

Remove all components from packing and place on the floor.

To ensure the validity of the General Vehicle Type Ap-

proval, the 4 enclosed factory plates (f) need to be at-

tached on the left and the right of the cross bar between the

holding plates of the drive units.

Loosely attach the drive units to the lateral bar. The bolts

(lock nuts) must be no more than finger-tight.

Nut M8 (4 x) M8 x 30 (4 x)

Place the drive units with the crossbar and attachment set (b)

onto the vehicle frame and screw tight with the two screws (c)

so that it is just possible to slide along the frame.

Special accessory installation

1. Spacer set 30 mm

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 170 mm

and up to140 mm,

part no. 60030-95000.

2. Spacer set 60 mm

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 140 mm

and up to 110 mm,

part no. 60030-95100.

3. Low chassis kit

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 110 mm

and / or for bridging struts,

part no. 60010-64900.

In Germany, this installationkit

must be accepted by a vehi-

cle expert.

3a. Low chassis kit, short

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 110 mm,

part no. 60030-37600.

In Germany, this installation

kit must be accepted by a

vehicle expert.

4. AL-KO Chassis M Adapter set

Mounting set to compensate the

frame edges for caravans with

AL-KO Chassis M,

part no. 60030-38600.

Detailed installation instructions are provided with the

relevant mounting set.

The Mover® TE R4 is not approved for installation

on caravans / trailers with any other chassis!

Any drilling (exception: when using low chassis kit) or welding

to the chassis is not allowed. Under no circumstances remove

any suspension components from the chassis.

Choice of location

The Mover® is mounted in front of the first axle and behind the

second axle. Only the bolts that are provided must be used

to secure the Mover® (or the add-on parts provided as special

accessories).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover TE R4 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 12,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Mover Mover TE R4 Manual

Product: