Manual Truma Mover Mover SR Version 2 (page 17 of 68) (English, German, Dutch, Danish, French, Italian, Spanish)

484645

Zoom out

Zoom in

1/68

The equipment can only be fitted to caravans / trailers within

the following dimensions.

min.

170*

min. 1200 / max. 2000

max. 2400

min. 50

min. 25

min. 35 **

170

min. 2,8

Caravan floor

All dimensions in mm.

* for a loaded vehicle with a max. allowed gross weight

** for U-profile

Measuring the chassis height

A frame height of min. 170 mm is required about 330 mm

from the outer edge of the tyre at the height of the wheel

hub / centre.

330

min. 170

Determining the installation type

1. Standard installation

Standard installation for chassis with a U or L-profile and a

frame height of min. 170 mm. No special accessories are

required.

2. Installation in a chassis with a U or L-profile and

frame height between 110 mm and less than 170 mm

The spacer set 30 mm (up to 140 mm frame height) or spacer

set 60 mm (less than 140 mm frame height) is required to

compensate the height difference.

3. Installation with chassis with U-profiles or L-profiles

with frame height of less than 110 mm

A low chassis kit needs to be used to compensate the

height difference for chassis with a height of less than

110 mm.

In Germany, the low chassis kit installation must

be accepted by a vehicle expert.

4. The AL-KO Vario III / AV installation kit must be used

with the AL-KO Vario III / AV chassis with a frame thickness of

less than 2.8 mm.

4a. For mounting in front of the axle on the

AL-KO Chassis M, with sliding rails

The AL-KO Chassis M Adapter set needs to be used to

compensate the overlapping frame edges.

5. Installation with Eriba Touring chassis

The Eriba Touring mounting set is needed for the Eriba Touring

chassis.

Special accessory installation

1. Spacer set 30 mm

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 170 mm

and up to140 mm,

part no. 60030-95000.

2. Spacer set 60 mm

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 140 mm

and up to 110 mm,

part no. 60030-95100.

3. Low chassis kit

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 110 mm

and / or for bridging struts,

part no. 60010-64900.

In Germany, this installationkit

must be accepted by a vehi-

cle expert.

3a. Low chassis kit, short

For compensating the height differ-

ence for caravans / trailers with a

frame height of less than 110 mm,

part no. 60030-37600.

In Germany, this installation

kit must be accepted by a

vehicle expert.

4. AL-KO Vario III / AV

Installation kit

For caravans with

AL-KO Vario III / AV Chassis

(frame thickness less

than 2,8 mm) mandatory,

part no. 60010-21500.

4a. AL-KO Chassis M Adapter set

Mounting set to compensate the

frame edges for caravans with

AL-KO Chassis M,

part no. 60030-38600.

5. Mover® mounting set

for Eriba-Touring,

part no. 60030-09000.

Installation is not possible in

some cases because of

attachments to the underbody.

Contact your dealer if necessary.

60 - 100 mm

Detailed installation instructions are provided with the

relevant mounting set.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover SR Version 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 11,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Mover Mover SR Version 2 Manual

Product: