484645
15
Zoom out
Zoom in
Previous page
1/68
Next page
15
Synchronising the electronic control unit with
the radio remote hand set
The remote hand set and the control unit are synchro-
nised with each other in the factory.
If the control unit or the remote hand set is replaced, they
must be re-synchronised as described below.
Check that the assembly has been carried out as specified
in the installation instructions and that the drive rollers have
no contact. Check that the battery is properly connected,
check the condition of the battery and that a voltage of 12 V is
present at the control unit.
Press the reset button (k) on the control unit and hold down
(red LED – j – flashes slowly), and after approx. 5 seconds the
LED (j) starts to flash rapidly. Then release the reset button
and press and hold down the caravan reverse button on the
remote hand set (c) within 10 seconds, simultaneously switch-
ing on the remote hand set using the slide switch (a).
a
c
j
k
The remote hand set and the control unit are synchronised to
each other. After successful synchronisation, the red LED
flashes rapidly.
Conformity Declaration
1. Manufacturer master data
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Equipment identification
Model / Version:
Mover® SR manoeuvring aid
3. Complies with the requirements of the following
EC directives
3.1 R&TTE directive (1999/5/EC)
3.2 EMC directive (2004/108/EC)
3.3 Radio Interference in Vehicles 72/245/EEC
(with the supplements)
3.4 Machinery Directive 2006/42/EC
3.5 End of Life Vehicles (2000/53/EC)
and bears the type approval number e1 03 4473 and the
CE symbol.
Mover® SR:
Class 1, frequency 868 MHz.
Countries:
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
4. Basis of proof of conformity
EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),
EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),
EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,
EN55022:2003 (Class B), ISO 7637-2:2004, EN60950:2001,
2004/104/EC, 2005/83/EC, 2006/28/EC, 2006/42/EC,
2000/53/EC
5. Monitoring body
Federal Office for Motor Traffic
6. Information concerning position of undersigned
Signature: Dr. Schmoll
Executive Manager, Technology Putzbrunn, 26.11.2010
Technical data
Designation
Mover® SR
Area of operation
Single axle caravans with a total weight up to 2000 kg
Operational voltage
12 V DC
Current consumption
Average approx. 20 A
Maximum 120 A
Stand by consumption
< 20 mA
Remote hand set frequency
Class 1, 868 MHz
Speed
Approx. 16 cm per second (depending on weight and incline)
Weights
Approx. 34 kg (including cross actuation device)
Right to effect technical modifications reserved!
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Truma Mover Mover SR Version 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Truma Mover Mover SR Version 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 11,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info