Manual Truma Aventa comfort (page 20 of 80) (English, German, Dutch, Danish, French, Italian, Spanish)

489376

Zoom out

Zoom in

1/80

Manufacturer’s terms of warranty

1. Case of warranty

The manufacturer grants a warranty for malfunctions in the

appliance which are based on material or production faults.

In addition to this, the statutory warranty claims against the

seller remain valid.

A claim under warranty shall not pertain:

for parts subject to wear and in cases of natural wear and

tear,

as a result of using components in the units that are not

original Truma parts in the units,

as a consequence of failure to respect Truma instructions

for installation and use,

as a consequence of improper handling,

as a consequence of improper transport packing.

2. Scope of warranty

The warranty is valid for malfunctions as stated under item 1,

which occur within 24 months after conclusion of the pur-

chase agreement between the seller and the final consumer.

The manufacturers will make good such defects by subse-

quent fulfilment, i.e. at their discretion either by repair or

replacement. In the event of manufacturers providing service

under warranty, the term of the warranty shall not recom-

mence anew with regard to the repaired or replaced parts;

rather, the old warranty period shall continue to run. More ex-

tensive claims, in particular claims for compensatory damages

by purchasers or third parties, shall be excluded. This does not

affect the rules of the product liability law.

The manufacturer shall bear the cost of employing the Truma

customer service for the removal of a malfunction under war-

ranty – in particular transportation costs, travelling expenses,

job and material costs, as long as the service is carried out in

Germany. The warranty does not cover customer service work

in other countries.

Additional costs based on complicated removal and installa-

tion conditions of the appliance (e.g. removal of furniture or

parts of the vehicle body) do not come under warranty.

3. Raising the case of warranty

The manufacturer‘s address is:

Truma Gerätetechnik GmbH & Co. KG,

Wernher-von-Braun-Straße 12,

85640 Putzbrunn.

In Germany, always notify the Truma Service Centre if prob-

lems are encountered; in other countries the relevant service

partners should be contacted (see Truma Service Booklet or

www.truma.com). Any complaints are to be described in de-

tail. Please also specify the device serial number and date of

purchase.

To avoid transport damage, the device may only be dispatched

after agreement with the Truma Service Centre in Germany or

with the particular service partner concerned abroad. The risk

for possible transport damage will otherwise be borne by the

consignor.

If it is a case of warranty, the factory shall bear the cost for

the delivery to the factory and the cost for returning the ap-

pliance to the customer. If the damage is deemed not to be

a warranty case, the manufacturer shall notify the customer

and shall specify repair costs which shall not be borne by the

manufacturer; in this case, the customer shall also bear the

shipping costs.

–

Installation and repair of the device may only be carried out by

properly qualified professionals. Before staring work, read the

installation instructions thoroughly and follow them carefully!

Scope of delivery

External unit:

1 Aventa comfort

2 brackets

4 screws, M6 x 70, coated with sealant

6 screws, M6 x 12, coated with sealant

1 base ring

2 roof thickness adapters (each 10 mm)

1 remote control with mounting

2 screws, 2.9 x 16 for mounting

2 batteries, type AAA

1 set of instructions for installation and use

1 installation template

3 Wago terminals

Air distributor:

1 air distributor, fully assembled

Installation accessories

10 mm roof thickness adapter, 1 x (part no. 40091-16900)

Sealing frame (part no. 40091-19500)

recommended for optimum sealing in the case of retrofitting

in vehicles with cut-outs measuring 400 x 400 mm.

Covering tape

Cream (part no. 40091-31200)

Grey (part no. 40091-31300)

for covering gaps of up to 5 mm between the air distributor

and the roof.

l ~ 2,36 m

Intended use

This unit was designed for installing in motor homes and cara-

vans. It is intended for domestic use. Any other applications

are only possible after consultation with Truma.

–

Installation instructions

Truma aventa making clicking noise. Other than the noise, which gets louder with use, the unit works perfectly. Has anyone else had this problem?
Bev Submitted on 7-4-2023 at 08:16
Reply Report abuse
My truma aventa is making a ticking noise. Has got a solution due this problem. The unit works perfectly otherwise Submitted on 7-4-2023 at 08:13
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Truma Aventa comfort in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Truma Aventa comfort Manual

Product: