753364
18
Zoom out
Zoom in
Previous page
1/21
Next page
18 EN
170W multi-function tool PMTS 01-230V
The device becomes hot:
Make sure not to exert too much pressure on the device
during grinding.
Select a lower speed by turning the setting wheel for
speed selection(1) to a low level.
Check whether the tool is suitable for the tasks to be
carried out.
Keep the venting slots clear to prevent the motor from
overheating.
Info
Wait for at least 10 minutes before switching the
device back on.
The tool is loose:
Make sure that the clamping nut(39) is tightened properly
to the tool holder.
The cutting disc has difficulties with penetrating the
material to be processed or the cutting performance of the
abrasive wheel is insufficient:
Check whether the chosen tool is suitable for the material
to be processed.
Check the set speed; it must be suitable for both the tool
and the material.
Select a higher speed by turning the setting wheel for
speed selection(1) to a higher level.
If the cutting disc or abrasive wheel is worn, replace it with
a new one.
The device is running but the flexible shaft does not work:
Check whether the inner axis(30) of the flexible shaft is
fixed firmly in the tool holder(27).
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Allow the device to cool down completely.
Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.
Notes on maintenance
Inside the device, there are no parts that need to be lubricated
by the user.
Cleaning
The device should be cleaned before and after each use.
Note
The device does not have to be lubricated after
cleaning.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Clean the device with a soft, damp and lint-free cloth.
Make sure that no moisture enters the housing. Protect
electrical components from moisture. Do not use any
aggressive cleaning agents such as cleaning sprays,
solvents, alcohol-based or abrasive cleaners to dampen
the cloth.
Dry the device with a soft, lint-free cloth.
Remove any abrasive dust and, if applicable, wood chips
from the tool holder.
Keep the ventilation openings free from dust deposits to
prevent overheating of the motor.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info