753364
16
Zoom out
Zoom in
Previous page
1/21
Next page
16 EN
170W multi-function tool PMTS 01-230V
Milling:
For milling a groove, use the positioning fixture(25)
provided to ensure vertical guiding.
Provide for an even forward motion to prevent overheating
of the milling cutter.
Engraving:
For engraving, use the flexible shaft supplied to obtain
precise guiding of the tool.
Hold the handle of the flexible shaft at a slight angle while
performing the engraving task, similar to the position of
holding a pen. Your arm should be resting on the table.
Guide the engraving bit over the workpiece applying light
grinding pressure.
Preferably use excess material to test the feed rate.
Warning of hot surface
Ensure that the flexible shaft does not form a loop or
become kinked during operation. There is a risk of the
shaft becoming hot and melting with the hose.
Do not touch the handle if it became hot. Risk of burns.
Polishing:
When you polish the workpiece, guide the tool over the
workpiece only applying light grinding pressure.
For polishing jewellery, the flexible shaft supplied is suited
to obtain precise guiding of the tool.
Applying the stainless steel brush
When you polish the workpiece, guide the tool over the
workpiece only applying light grinding pressure.
For polishing, buffing or cleaning with a wire brush, select
the lowest speed level1 to prevent the brush and material
from damage.
Switching the device on and off
Warning
The event of a temporary power failure can lead to
the device accidentally switching on.
Even if there is no voltage present, always switch the
device off using the on/off switch.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed tool and the speed set are
suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Switch the device on by setting the on/off switch (5) to
position I.
5
4. Switch the device off by setting the on/off switch (5) to
position 0.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info