753364
17
Zoom out
Zoom in
Previous page
1/21
Next page
EN 17
170W multi-function tool PMTS 01-230V
Operating mode: Cutting
For cutting and cutting to length materials like for instance
wood, plastics, aluminium, brass or metal as well as protruding
nails or screws:
use the cutting discs(8)
Operating mode: Sanding
For sanding wood, metal or steel:
use the abrasive belts(24)
or abrasive wheels(9)
For grinding rock or ceramic:
use the aluminium oxide grinding heads(12)
For grinding or deburring tiles, glass or hard, brittle materials
such as ceramic:
use the grinding stone(15)
Operating mode: Milling
For milling grooves, milling out moulds, apertures or
feedthroughs in wood or plastics:
use the milling cutter for grooves(19)
as well as the positioning fixture(25)
For recessing or grooving material, e.g. when machining
jewellery:
use the milling cutter with the ball head(18)
Operating mode: Engraving
For creating engravings in materials like metal, plastics, glass,
ceramic, wood or leather:
use the diamond-tipped engraving bits(11)
and the flexible shaft(32)
Operating mode: Polishing
For polishing plastics or precious metals like gold and silver:
use the polishing attachments(23)
Operating mode: Rust removal
For remove rust from damaged areas, for instance in the motor
vehicle sector:
use the stainless steel brush(7)
Operating mode: Drilling
For drilling 3mm or 2mm holes into metal, wood or plastics:
use the HSStwist drill bits(17)
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
If required, allow the device to cool down.
Remove the tool from the device (see Start-up chapter).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.
Accessories Article number
Multi-function tool accessories
set 282-piece
6,210,000,301
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
The only exception is the replacement of the carbon brushes
(see chapter Replacing the carbon brushes).
Light smoke or odour is emitted during the first use:
This is not a fault. These phenomena disappear after a
brief runtime.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages. If you
notice damages, do not try to take the device back into
operation. To avoid safety hazards, do not perform any
repairs. Send the device to a specialist electrical company
or to Trotec to have the power cable and mains plug
replaced.
Check the on-site fusing.
Info
Wait for at least 10 minutes before switching the
device back on.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info