753369
13
Zoom out
Zoom in
Previous page
1/20
Next page
EN 13
cordless pendulum action jigsaw PJSS 11-20V
Mounting / removing the anti-splinter guard
The anti-splinter guard serves to avoid tearing of the surface
when sawing in wood. The anti-splinter guard can only be used
in combination with certain types of saw blades and at a cutting
angle of 0°. You may remove it if required, e.g. if you want to
make a mitre cut.
The anti-splinter guard is already preassembled.
1. Remove the battery(13) from the device (see Removing
the battery).
2. First remove the sliding block(27; see Mounting /
removing the sliding block).
3. Remove the anti-splinter guard(18) from the base plate(6)
by carefully pushing the anti-splinter guard(18) outwards.
6
27
18
4. To reinsert the anti-splinter guard(18), carefully push it
into the recess of the base plate(6) from below until the
anti-splinter guard(18) locks in place. When doing so,
make sure that the smooth side of the anti-splinter guard
points away from the device.
5. Refit the battery(13; see Inserting the battery).
Adjusting the cutting angle
The cutting angle can be adjusted to the left or right at angles of
0° / 15° / 30° / 45°.
1. Remove the battery(13) from the device (see Removing
the battery).
2. First, remove the anti-splinter guard(18) and the
protective cover(24).
18
24
13
3. Loosen the screws(22) at the bottom of the device using
the Allen wrench(17).
22
17
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PJSS11-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PJSS11-20V in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PJSS11-20V

Trotec PJSS11-20V User Manual - German - 23 pages

Trotec PJSS11-20V User Manual - Dutch - 22 pages

Trotec PJSS11-20V User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info