753369
12
Zoom out
Zoom in
Previous page
1/20
Next page
12 EN
cordless pendulum action jigsaw PJSS 11-20V
10
4. If a saw blade is inserted, remove the saw blade from the
quick-release chuck(8).
5. Insert the saw blade into the quick-release chuck(8).
Make sure that the teeth of the saw blade point to the front
and that the saw blade is seated in the guide roller(10).
6. Push the saw blade into the quick-release chuck all the
way to the stop(8). Use a suitable sawblade with single lug
shank.
7. Let go of the quick-release chuck(8).
ðThe quick-release chuck(8) must return to its initial
position.
8. Check whether the saw blade is properly locked in place.
9. Reattach the protective cover(24).
10. Refit the battery(13; see Inserting the battery).
Mounting / removing the sliding block
To protect the surface of the material to be processed, the
sliding block is already preassembled. You may remove the
sliding block if required.
1. Remove the battery(13) from the device (see Removing
the battery).
2. Release the two fastening clips(26) at the rear.
3. Slowly push the sliding block(27) forward while carefully
detaching the front part of the sliding block from the base
plate(6).
4. Pull the sliding block(27) downwards carefully.
6
26
27
5. To reattach the sliding block(27), first push it onto the
front part of the base plate(6).
6. Then let the fastening clips(26) lock in place at the rear.
7. Check the sliding block(27) for tight fit.
8. Refit the battery(13; see Inserting the battery).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PJSS11-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PJSS11-20V in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PJSS11-20V

Trotec PJSS11-20V User Manual - German - 23 pages

Trotec PJSS11-20V User Manual - Dutch - 22 pages

Trotec PJSS11-20V User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info