689444
28
Zoom out
Zoom in
Previous page
1/60
Next page
Operating Manual – Electronic Humidifier
B - 8
EN
16. Menu programming
The B 500 Professional offers you the possibility of
changing the factory settings and making various set-
tings to meet your requirements.
Please proceed as follows:
1. Press the „PROG” button on the remote control unit
„Prog“.
2. The number „10“ will appear on the control panel
display.
3. Select one of the main menus (10, 20, or 30, see
table below).
4. Once your have reached the main menu you are
looking for, press the „SET” button to reach the re-
quired sub-menu, e.g. 11, 12, or 13.
5. Once your have reached the sub-menu you are loo-
king for, after a few seconds the display will flash
with a number such as 00, 01, or 98. By pressing
the blue „Humidity“ button (%) you can increase
the figure with ‘+’ or decrease it with ‘-‘.
6. When you have made the necessary change, sim-
ply wait for about 10 seconds. After that the display
will jump back to the standard position (showing
relative humidity) and the changes will be saved.
m If no more settings have been made for 10
seconds the display will jump back to the s
tandard position (showing relative humidi-
ty). The programming process can be termi-
nated at any time by pressing the ON / OFF
button. Please note, however, that this will
result in the loss of all the changes that have
been made.
Main
menu
Sub-
menu
Description Setting Comment Factory
setting
10 Hooter setting
11 Hooter active when tank
empty
00 = OFF
01 = ON
01
12 Hooter active when UV
lamp is defective
00 = OFF
01 = ON
Only at version with
UV-C-technology 01
13 Hooter active with external
water sensor alarm
00 = OFF
01 = ON
With external sensor
01
14 Hooter active when tank
content >=50 liters
00 = OFF
01 = ON
(Only in combination with automatic
water supply) 01
15 Hooter active when no
radio signal
00 = OFF
01 = ON 01
20 Relay setting
21 Relay active when tank
empty
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system 00
22 Relay active when UV lamp
is defective
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system 00
23 Relay active with external
water sensor alarm
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system 00
24 Relay active when tank
content >= 50 Litre
00 = OFF
01 = ON
Only necessary with connection to a
central air-conditioning system 00
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec B500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec B500 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info