Manual Trotec B500 (page 30 of 60) (English, German, French)

689444

Zoom out

Zoom in

1/60

Operating Manual – Electronic Humidifier

B - 10

water container, there are different

Secosan Products available. Like

the Secosan Stick, LiQVit is also

designed to keep the water in your

humidifier clean and free of bac-

teria, algae and mould. Apart from

that, it also reduces the waters’

surface tension, which leads to an

increased rate of dehumidification.

Working against lime scale, it can

also significantly increase the life-

time of the evaporation filter.

19. Cleaning

The device should be cleaned of calcium (lime) de-

posits and soiling every 3-4 months. For this purpose,

the upper section of the housing is detached, the filter

removed and the centre plate cleaned. A commer-

cially available cleaning agent can be used for this

purpose. All traces of the cleaning agent must be re-

moved (rinse thoroughly with clean water).

m Do not use benzene or other solvents that

attack plastic.

The humidifier sh-

ould be cleaned

thoroughly once

a year (preferably

by our mainte-

nance service).

Use commercially

available limescale remover (decalcifying agent) to

remove lime residue. Then rinse thoroughly with clean

water. The water distributor is open at the top, easily

accessible and should be cleaned of any residue. If

blocked, the drain holes in the water distributor can

be cleaned with a knitting needle or similar. While

cleaning, check to ensure there are no sludge depos-

its in the pump hoses. If necessary, they should be

cleaned with a narrow bottle brush or they should be

replaced. Should the equipment remain out of service

for longer periods, the residual water is to be emptied

out, the filter is to be removed and cleaning is to be

carried out.

20. Accesoires (optional extras)

Automatic water supply

The connection to the local water main must be made

by a qualified specialist, i.e. a licensed installation tech-

nician. (Please note the water supply utility’s regula-

tions. It may be advisable to fit a back-flow stop valve.)

We recommend our 1.5-metre long safety pressure

hose for the connection between the water pipe and

the appliance (Product no 1754).The automatic sys-

tem for topping up the water incorporates a magnetic

valve. In the factory the appliance is set at automatic

water supply at a maximum fill level of 30 litres, i.e.

when the fill level reaches 30 litres the water supply

is shut off. If the water supply is active, this is shown

by a running light (10-50 litre diodes flash on after the

other). The water supply is controlled by the electron-

ic rods in the water level display. To ensure faultless

functioning of the automatic water supply it is there-

fore necessary for the electrode rods to be cleaned

regularly with a sponge and freed of any deposits of

chalk or dirt. In order to avoid overfilling, when the fill

level of 50 litres is reached a malfunction message

is issued, i.e. the appliance is automatically switched

off, an audible warning signal is given, and Fault Code

04 appears in the display. If the water supply is de-

fective and the water level does not change although

the magnetic valve is open, the process is terminated

and Fault Code 01 appears in the display. Please refer

to the next page (Rinsing system) for a sketch and

the dimensions. We recommend for safety’s sake that

our safety collection tub (Product no. 1752) should be

used, connected to our safety water sensor (Product

no. 1757), or that an addition external water valve

should be used (Product no. 1753).

Water supply Rinsing system outlet

m The maximum water pressure must not ex-

ceed 10 bar!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trotec B500 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trotec B500 Manual

Product: