689444
25
Zoom out
Zoom in
Previous page
1/60
Next page
Operating Manual – Electronic Humidifier
EN
B - 5
11. Connections on the circuit board
Connection Description Power supply Power
consumption
X1 Power supply 230V AC (L, N, and 6 x PE) 230V 50Hz 200 VA
X2 Zero-potential malfunction reporting relay 42V 1A
X3 External water sensor (zero current) - -
1
Fan connection 230V AC 230V 50Hz 65 VA
2
Water pump 230V AC 230V 50Hz 25 VA
3
Rinsing pump 230V AC 230V 50Hz 25 VA
4
Magnetic valve 230V AC 230V 50Hz 10 VA
5
UV lamp 230V AC 230V 50Hz 6 VA
X9 Water sensors, 10 litre to 50 litre - -
12. Fan settings
The fan can be set by the remote control unit at any
of five speeds (4 set speeds and one automatic func-
tion). The required speed can be set with the Fan
button (see above) on the remote-control unit. When
the Fan button is pressed the bar indicator starts to
flash. Pressing the + or the – side increases or de-
creases the fan output. The automatic function ena-
bles the appliance to control its own speed depending
on the output required. It does this by measuring the
changes in atmospheric humidity and increasing or
decreasing the fan speed accordingly. To activate the
automatic fan, press the „-” side of the Fan button
and hold it down until the last bar has disappeared
from the indicator and the red diode with the fan
symbol has gone out. To deactivate it, simply increase
the fan speed with the Fan button until the red diode
comes on again.
Changing the fan
m Before doing any work on the appliance,
always make sure it is unplugged from the
wall socket.
1. Loosen and pull
the fan plug by
pressing the plug
clamps.
2. Set the centre
part of the B 500
aside and loosen
the three boltings. Mind that the fan does not fall
out after the screws are loosened.
3. Take the fan out.
4. Insert the new fan
and attach the
screw threads to
the vibration ab-
sorber by plugging
them through the
holes in the centre plate.
5. Tighten the fan and plug the appliance in again.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec B500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec B500 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info