Manual Trotec B500 (page 23 of 60) (English, German, French)

689444

Zoom out

Zoom in

1/60

Operating Manual – Electronic Humidifier

B - 3

3 SET button

With the Set button you can select from the sub-men-

us Taste (21, 22, 23 ) in programming mode. If no

other settings are made, after 10 seconds the display

automatically jumps back to the standard display ﬁg-

ure, i.e. indoor atmospheric humidity. Changes that

have been made to the required humidity setting or

in programming mode are saved.

4 PROG button

Pressing this button opens the programming mode

of the B 500 so that you can select from the main

menus (10, 20, and 30). See page 9 for a descrip-

tion of the menus.

5 Flush button

Pressing this button activates the rinsing system.

(optional extra)

6 ON/OFF-Taste

The appliance can be switched on or off by pres-

sing this button.

m Supplied with two 24G Size AAA 1.5V batter-

ies.Please do not use any other type!

07. Filling

(not applicable for humidifiers with automatic

water supply)

The device is filled with water via the upper filler flap

using a watering can (only up to the max. level mark,

50 litres). The water level is indicated by light emitting

diodes (max. 5 stages). Both normal tap water and

softened water can be used to operate the humidifier.

m Do not use distilled water! Take care to fill

correctly, since spilt water could enter the

equipment and cause a short circuit. The

maximum temperature of the water must

not exceed 35 °C.

08. Water level indicator

The water level is sensed by copper electrodes and

is indicated by LEDs on the control panel. The device

switches off automatically if the red „Top up water“

LED comes on. A small quantity of water always re-

mains in the tank (approx. 15 litres). It is advisable

to regularly (approx. every 3-4 weeks) drain off the

residual water depending on the degree of soiling

and calcium (lime) content. The opportunity should be

taken to clean the water tank with a sponge or a wet

vacuum cleaner. The electrode rods require occasion-

al cleaning to ensure they do not indicate incorrect

values or cause the humidifier to shut down owing to

calcification of the voltage electrodes. Distilled water

must not be used because it leads to malfunctions in

the water level indicator.

Electrode rods

09. Filter change indicator

The B 500 atmospheric humidifier has a filter change

indicator. The frequency with which the filter needs to

be changed depends on the length of time for which

the pump runs, the hardness of the water, and the

fan. Under the best circumtstances it will have to be

changed after 98 days, in the worst after 56 days, but

this is only a recommendation; the situation can be

affected one way or the other by such external factors

as air pollution or the hardness of the water. In any

case it is advisable to make regular visual checks of

the filter Please see the section on „Changing the fil-

ter” for detailed instructions. When you have changed

the filter you have to reset the indicator manually to

its initial position. Please proceed as described in the

section on „Menu programming“ to Menu 33, where

you can reset the filter change indicator at any time to

its initial position of 98 days.

Filter change

Depending on the operating time of the humidifier,

the special filter is used up during the course of time

as a result of mineral deposits in the water and dust

deposits in the air (every 8-16 weeks depending on

the water hardness, dust accumulation and operating

time). The filter should not be washed as this reduces

the evaporation capacity of the device. All humidifi-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trotec B500 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trotec B500 Manual

Product: