485386
44
Zoom out
Zoom in
Previous page
1/47
Next page
The software version is updated by downloading the new
software via the satellite. Prerequisite for this is that a more
up-to-date version is available.
Press OK and enter password.
The Software Update menu appears.
All transponder receiving data are preset by default.
All LNB / DiSEqC data are also preset, but can be
changed, if necessary.
Select “Air Down Load Start” and press OK.
A message is displayed saying
“Software Update in Progress ...”
The receiver first checks whether a more up-to-date
software version is available.
If not, “No available software found! Please try again later
on” is displayed.
After successfully downloading a new software version
“Software update completed!” is displayed and the
receiver automatically restarts.
Software update through PC
For carrying out this method you need to have the latest software file as well as a special
“loader” software for your PC.
It will be available by download from TRIAX website
www.triax.com Please check availability.
GB
9.11 Factory Preset
Go to the Main Menu, select “Channel Manager” and select “Reinstallation”.
Enter password upon request.
A warning message appears.
Press “EXIT” to cancel or OK to confirm.
The “Channel Manager” menu screen appears.
This function will delete all channel data and all individual settings from the receiver. The pre-
programmed channel data will be loaded again, and all settings will be reset to their default
values.
9.12 Software Update
If required, the latest development of the receiver operating software can be loaded to this unit
by software update. There are two kinds of software update procedures: Software update
through satellite (ASTRA 19
o
EAST). This method is also known as “OTA” (”Over The Air”).
Also, there is a method of Software update through PC, using the RS-232 data interface on
the rear side of this unit.
Software update through Satellite
Go to the Main Menu and select “System Information”.
Use this to check the software version or release date of
the current software before upgrading. System information
screen offers date, software version, and firmware.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB S2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB S2 in the language / languages: English, German as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info