485386
43
Zoom out
Zoom in
Previous page
1/47
Next page
“Sending” appears on the sending receiver and “Receiving” appears on the receiving
receiver.
The transfer progress bar shows the progress of the channel data transmission. When the
transfer is completed, “Complete” appears.
You can check that the channel data on the Slave and Master receivers are the same.
PC to Receiver (PC to Set)
You will need suitable software to be able to transfer the channel information from a receiver to
your PC and vice versa. This software will be provided upon request.
Please visit TRIAX website www.triax.com
Use a RS-232C cable (cross type) to connect the Receiver to your PC.
In your PC programme set your PC as “MASTER (Set to Set)”. “MASTER” signifies the device
that is transmitting the channel information.
On the receiver go the Main Menu, select “Channel Manager” and then select menu option
“Channel Data Transfer”.
Set your receiver as “SLAVE (PC to Set)”
Follow the instructions on the PC program to complete the rest of this process.
9.10 Delete all Channels
This function will delete all channel data from the receiver.All other individual settings
will be kept.
Go to the Main Menu, select "Channel Manager",and select "Delete All Channels".
Enter password upon request
A warning message appears.
Press "EXIT" to cancel or OK to confirm.
The “Welcome” screen appears. Make your language selection and press OK.
Follow the instructions on the screen: either load pre-programmed channel data or start your
individual channel search process.
GB
Remove Satellite TP Information
Move to the TP information you want to delete.
Press the LEFT button. A message asking for your confirmation asking for your confirmation
appears.
If you want to delete, press the OK button. Otherwise, press the BACK button or the EXIT
button.
9.9 Data Transfer
Receiver to Receiver (Set to Set)
Cable Pin Configuration
(1) o --------- o (4)
(2) o --------- o (3)
(3) o --------- o (2)
(4) o --------- o (1)
(5) o --------- o (5)
Use a RS232C cable (cross type, “0-modem”) to connect
both receivers.
Go the Main Menu, select “Channel Manager” and then
select menu option “Channel Data Transfer”.
Select “3.MASTER (Set to Set)” for the receiver that will send
the channel data.
Select “4.SLAVE (Set to Set)” for the receiver that will
receive the channel data.
Press the OK button on both receivers to start the transfer.
This is intended to transfer the channel information on one
receiver to another receiver of the same model / version.
You can also transfer channel information from your PC to a
receiver.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB S2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB S2 in the language / languages: English, German as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info