485390
41
Zoom out
Zoom in
Previous page
1/48
Next page
DVB 168 S (GB)-17 050908
www.triax.com
17
Notes:
Satellite Positions are stored in the "Antenna Positioner". Therefore, you will need to manually
set the position of satellites that the "Antenna Positioner" does not currently support.
9.5 USALS
This convenient function locates the desired satellite by USALS if latitude/longitude of the
receiving place and satellite longitude are known.
Move to USALS mode by using the buttons at the DiSEqC item in the "General Settings"
menu.
Move to "Auto Search" or "Manual Search" to search the desired channel in USALS mode.
Click the DiSEqC item in the Auto Search Menu to open the USALS Setting Popup Menu.
Enter the user location latitude and longitude. Use numeric keys to enter values. Use
buttons to convert East and West.
Enter the latitude and longitude of the desired satellite. Use numeric keys to enter values.
Use buttons to convert East and West.
Click Store to save the input information. The antenna will direct itself towards the computed
USALS result.
If it is physically impossible to direct the satellite, an error will be displayed. Press the "Back"
key and enter new information if this happens.
Use the Signal Strength Bar to check if a satellite signal is received from the new antenna
direction.
Use Nudge East/West or Go to Reference to help the antenna work.
9.6 Auto Search Function
Auto Search is the one used most frequently used methods of channel search. It is intended to
have the receiver automatically search all the channels from the satellite you selected.
Select "Auto Search" and then press the OK button.
Select the satellite using the OK button. If you want to
change the Satellite Information, press the GREEN
button on the remote control.
Set the LNB information and DiSEqC information for
the satellite. You can use the existing setting. To
change the setting, use the buttons.
You can select the transponder (TP) you want to use
and check the difference in signal strength and
reception quality from one transponder to another.
Set DiSEqC port to OFF (or to a port you want to use,
if any)
Select the type of channels to search: FTA,
Scrambled, ALL or Network.
Start searching for TV and radio channels using the
above settings. Press the RED button.
TV and radio broadcast channels will be searched.
The names of the channels will be listed.
Press the EXIT button to return to viewing mode and
check whether the reception of the selected channel
is good.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB 168S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB 168S in the language / languages: English, German as an attachment in your email.

The manual is 11,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info