775437
9
Zoom out
Zoom in
Previous page
1/77
Next page
6 TREK ASSEMBLY MANUAL 27 April 2012
Basic Assembly
To install a wheel with a Clix
1. With the lever of the Clix quick-release in the OPEN position (Figure 11), push
together the cup and lever (Figure 13) and lower the fork on the wheel until the
inner surfaces of the fork ends touch the wheel.
Note: Some forks have special dropouts, so you do not have to push together the cup and lever;
the fork will slide automatically on the wheel.
2. Lock (close) the Clix lever. Do not turn the lever like a wing-nut to tighten it; this
will not make sufficient force to hold the wheel.
3. Align the lever so it does not touch a bicycle part or an accessory part (such as rack
or fenders), and so obstacles in the path of the bicycle can not catch the lever.
4. Make sure you have correctly locked the Clix:
• Lift the bicycle and hit the top of the tire with a solid blow. The wheel should not
come off, be loose, or move from side to side.
• Make sure the locked quick-release lever can not be turned.
• If you can lock the lever with little or no resistance, the clamp-force is not sufficient.
• When the Clix is locked, the clamp-force is sufficient to cause metal-into-metal
engagement (embossing) of the dropout surfaces.
To remove a wheel with a Clix
1. Release the Clix; move the quick-release lever to the OPEN position (Figure 11).
2. Push together the cup and lever (Figure 13), and push them in slightly to move the
adjusting nut out of the fork.
3. Move the wheel out of the fork.
Figure 13. Holding the cup and lever
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 2012 in the language / languages: English as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info