548204
24
Zoom out
Zoom in
Previous page
1/41
Next page
00
3. Adjust the seat and re-tighten
the seat fixing bolt according
to the type of seatpost:
Double bolts using a 5 mm
allen wrench- 80-125 lb•in (9.6-
14.1 N•m).
Single bolt using a 13 or 14
mm open-end wrench- 180-220
lb•in (20.3-24.9 N•m).
Single bolt using a 6 mm allen
wrench- 150-250 lb•in (17-28.3
N•m).
Double bolts using a 4 mm
allen wrench- 45-60 lb•in (5-6.8
N•m).


1. Sit on the seat in riding
position without shoes, while
someone holds the bicycle up.
2. Position the crank arms so
they are
parallel to
the seat
tube.
3. Loosen the
seatpost
binder bolt,
or quick-
release.
4. Extend the
seatpost
until, with
your heel resting on the bottom
pedal, your extended leg is
straight (Figure 18).
When wearing your shoes there should be a
slight bend in your knee in a proper riding
position; with the ball of your foot on the pedal.
5. Make sure
the minimum
insertion
mark on
the seatpost
(Figure 19)
is not visible
above the
bike frame. A
minimum of
2
1/2
(64 mm)
of seatpost
must remain
in the frame.
6. Close the seatpost quick-
release, or tighten the bolt to
85-125 lb•in (9.6-14.1 N•m)


1. Loosen and
remove the
clamp bolts
(Figure 20).
2. Move the
seat mast to
the desired
position.
3. Install and
tighten the
seat mast
clamp bolts to
85-125 lb•in
(9.6-14.1 N•m).
Chapter : Adjustment
Figure - Minimum
insertion mark on
seatpost
A- This line must be
inside the bike frame
A






Figure - Leg extension with
proper seat height
Figure 0- Tricycle seat
mast
A- Seat mast
B- Clamp bolts
A
B
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 07-TK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 07-TK in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info