548204
25
Zoom out
Zoom in
Previous page
1/41
Next page


Some bicycles offer adjustable
crankarm length. To change the
crank length, remove the pedals
and install them into the second
set of holes. Tighten by following
the instructions for Pedals.

To adjust the release force
on clipless pedals, refer to the
information on the CD supplied
with your bicycle, or consult your
dealer.
The left pedal is left-hand
threaded, while the right pedal
is right-hand (normal) threaded.
Tighten pedals into the crankarms
to 350-380 lb•in (40.2-42.9 N•m).
Adjustment of pedal bearings
requires special tools and
training. These services should
only be performed by your dealer.

Adjustment of bottom bracket
bearings requires special tools
and training. These services
should only be performed by your
dealer.



1. In small increments, loosen the
rear wheel axle nuts on alternate
sides of the wheel.
If you fully loosen one side before loosening the
other, you may cause the bearings to come out of
adjustment.



1. Apply the front brake firmly
while you rock the bicycle
forward and backward.
2. With the front wheel off the
ground, slowly rotate the fork
and handlebar to the right and
left.
If the headset bearings rock in
the frame or do not turn smoothly,
do not ride the bicycle; take the
bike to your dealer for service.
Adjustment of headset bearings
requires special tools and training.
These services should only be
performed by your dealer.



1. Lift the chain from the
chainrings.
2. Rotate the crank so that one of
the arms is parallel to the seat
tube.
3. Put one hand on the crank arm
and one hand on the seat tube,
and attempt to move the crank
arm laterally toward and away
from the seat tube.
4. Spin the cranks.
If the crank feels or sounds loose,
or if the motion stops abruptly or
you hear a grinding noise coming
from the bearings, the bearings
need to be adjusted or re-greased
by your dealer.
Chapter : Adjustment
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 07-TK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 07-TK in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info