714421

TP-LINK T1600G-28PS (TL-SG2424P) Manual

735
Zoom out
Zoom in
Previous page
1/771
Next page
Configuration Guide 712
Configuring SNMP & RMON Notification Configurations
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the NMS host IP address as 172.168.1.222, UDP
port as port 162, name used by the NMS as admin, security model as SNMPv3, security
level as authPriv, notification type as Inform, retry times as 3, and the timeout interval as
100 seconds:
Switch#configure
Switch(config)#snmp-server host 172.168.1.222 162 admin smode v3 slev authPriv type
inform retries 3 timeout 100
Switch(config)#show snmp-server host
No. Des-IP UDP Name SecMode SecLev Type Retry Timeout
--- ------ ----- ---- ------- ------ ---- ----- -------
1 172.168.1.222 162 admin v3 authPriv inform 3 100
Switch(config)#end
Switch#copy running-config startup-config
3.2.2 Enabling SNMP Notification

Enabling the SNMP Standard Trap
Step 1 configure
Enter global configuration mode.
Step 2 snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart | auth-failure ]
Configure parameters of basic traps supported on the switch.
linkup:
When a port status changes from linkdown to linkup, the switch sends a linkup trap.
The trap is enabled by default. And the trap can be triggered when you connect a device to
a port.
linkdown:
When a port status changes from linkup to linkdown, the switch sends a linkdown
trap. The trap is enabled by default and can be triggered when you disconnect the device
from the port.
warmstart:
The trap indicates the SNMP feature on the switch is reinitialized with the
physical configuration unchanged. The trap is enabled by default and can be triggered if
you disable and then enable SNMP after the SNMP is completely configured and enabled.
coldstart:
The trap indicates an SNMP initialization caused by the reinitialization of the
switch system. The trap is enabled by default. The trap can be triggered when you reboot
the switch.
auth-failure:
The switch will send the trap when the SNMP request fails in authentication.
The trap is enabled by default.
… 735 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info