714421

TP-LINK T1600G-28PS (TL-SG2424P) Manual

733
Zoom out
Zoom in
Previous page
1/771
Next page
Configuration Guide 710
Configuring SNMP & RMON Notification Configurations
IP Mode Choose an IP mode for the host, which should be coordinated with the IP
Address.
2) Specify the user name or community name used by the NMS, and configure the security
model and security level based on the settings of the user or community.
User Name Specify the user name or community name used by the NMS.
Security Model Choose the corresponding SNMP version for the NMS.
The version should be consistent with settings of the user or community.
v1: The NMS uses SNMPv1.
v2: The NMS uses SNMPv2c.
v3: The NMS uses SNMPv3.
Security Level Choose the security level for the NMS that uses SNMPv3. The setting should
be consistent with that of the specified user or community.
noAuthNoPriv: No authentication mode or privacy mode is applied to check
or encrypt packets.
authNoPriv: An authentication mode is applied to check packets, but no
privacy mode to encrypt packets.
authPriv: An authentication mode and a privacy mode are applied to check
and encrypt packets.
3) Choose a notification type based on the SNMP version. If you choose the Inform type,
you need to set retry times and timeout interval.
Type Choose a notification type for the NMS that uses SNMPv2c or SNMPv3; the
default type is Trap.
Trap: Set the switch to send Trap messages to the NMS. When the NMS
receives a trap message, it will not send a response to the switch. Thus the
switch cannot determine whether the trap is received or not, and the trap that
is not received will not be resent.
Inform: Set the switch to send Inform messages to the NMS. When the NMS
receives an Inform message, it sends a response to the switch. If the switch
does not receive a response within the Timeout interval, it will resend the
Inform message. Therefore, Informs are more reliable than Traps.
Retry Set the retry times for Informs; the default is 3. The switch will resend the
Inform message if it does not receive response from the NMS within the
timeout interval. It will stop sending Inform messages when the retry time
reaches the limit.
Timeout Set the length of time that the switch waits for a response from the NMS after
sending an inform message; the default is 100 seconds. Set the length of time
that the switch waits for a response from the NMS after sending an inform
message; the default is 100 seconds.
4) Click Create.
… 733 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info