714421

TP-LINK T1600G-28PS (TL-SG2424P) Manual

734
Zoom out
Zoom in
Previous page
1/771
Next page
Configuring SNMP & RMON Notification Configurations
Configuration Guide
711
3.2 Using the CLI
3.2.1 Configuring the Host
Configure parameters of the NMS host and packet handling mechanism.
Step 1 configure
Enter global configuration mode.
Step 2 snmp-server host
ip udp-port user-name
[smode { v1 | v2c | v3 }] [slev {noAuthNoPriv |
authNoPriv | authPriv }] [type { trap | inform}] [retries
retries
] [timeout
timeout
]
Configure parameters of the NMS host and packet handling mechanism.
ip:
Specify the IP address of the NMS Host in IPv4 or IPv6. Please make sure the IP
addresses of the Host and the switch are able to reach to each other.
udp-port:
Specify a UDP port on the host to send notifications. The default is port 162.
For communication security, we recommend that you change the port number under the
condition that communications on other UDP ports are not affected.
user-name:
Enter the name used by the NMS. When the NMS uses SNMPv1 or SNMPv2c,
enter the Community Name; when the NMS uses SNMPv3, enter the User Name of the
SNMP Group.
v1 | v2c | v3 :
Choose a security mode for the SNMP group from the following: SNMPv1,
SNMPv2c, SNMPv3.
noAuthNoPriv | authNoPriv | authPriv:
For SNMPv3 groups, choose a security level from
noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no
encryption), authPriv (authorization and encryption). The defaut is noAuthNoPriv. Please
note that if you have chosen v1 or v2c as the security mode, security level cannot be
configured.
trap | inform:
Choose the information type which is only for SNMPv2c or SNMPv3; the
default is trap. When the NMS receives a trap message, it will not send a response to the
switch. Thus the switch cannot determine whether the trap is received or not, and the trap
that is not received will not be resent. When the NMS receives an Inform message, it will
send a response to the switch. If the switch does not receive a response within the Timeout
interval, it will resend the Inform message. Therefore, Informs are more reliable than Traps.
retries :
Set the retry times for Inform messages. The range is 1 to 255 and the default is 3.
The switch will resend the Inform message if it does not receive response from the NMS
within the timeout interval. And it will stop sending Inform message when the retry times
reaches the limit.
timeout :
Set the length of time that the switch waits for a response. The range is 1 to 3600
seconds; the default is 100 seconds. The switch will resend the Inform message if it does
not receive a response from the NMS within the timeout interval.
Step 3 show snmp-server host
Displays the information of the host.
Step 4 end
Return to privileged EXEC mode.
… 734 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK T1600G-28PS (TL-SG2424P) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK T1600G-28PS (TL-SG2424P) in the language / languages: English as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info