605840
63
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 6 Wireless Tab
NOTE: MAXtream Technology is only compatible with Pharos series products.
You cannot connect other Wi-Fi devices to an AP with MAXtream enabled.
MAXtream Station Mode
This setting is available in Client and Bridge mode and in the AP Client Router
mode when the wireless AP settings is disabled.
For client devices connected to a root AP with MAXtream enabled, you can
choose Latency Firstor Throughput Firstmode to better fit your application.
For example, VoIP
has a high demand for low latency. If you need a good
experience for VoIP, you can select Latency First. Games and downloads ask for
high throughput. You should select Throughput First to guarantee the high
throughput for the games and downloads. Please choose Auto Adjust if you are
not sure or you have no special requirements.
Wireless Client Settings
When this device is configured in the modes of Client, Repeater, Bridge and AP Client Router, the function
of wireless client settings is available.
SSID of AP
You can enter the SSID of the specific AP manually to connect to it or directly
survey all the APs around by clicking Survey.
MAC of AP
Displays the MAC address of the root AP. Its possible that two or more networks
use the same SSID in the AP list. Lock to AP can make the device connect to the
specified AP you had connected before the next time.
WDS
WDS (Wireless Distribution System) is a communication system among multiple
wireless local area networks established
between APs through wireless
connection. In this system, only data frames with four address fields can be
transparently forwarded at the link layer. In a WDS network, it is necessary that
the root AP supports forwarding of data frames four address fields. If not, only
data frames with the ARP/IP/PPPOE protocol can be forwarded among APs.
Enable Forward data frames to use four address fields.
DisableForward data frames to use three address fields.
- 60 -
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info