605840
62
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 6 Wireless Tab
Max TX Rate
Set the maximum transmit data rate.
Channel/Frequency
S
elect the channel used by this device to improve wireless performance.
1/2412MHz refers to Channel 1 and the frequency is 2412MHz. This setting is
only available in the modes of Access Point and AP Router.
CPE210/CPE220/BS210/OAP210 is a device with a frequency of 2.4GHz and
CPE510/CPE520
/BS510 has a frequency of 5GHz. The channel number varies in
different regions. We highly recommend you use the Spectrum Analysis tool to
select a proper channel.
Antenna Gain
Antenna Gain is only available in the page of BS210/BS510/OAP210. Enter the
antenna gain value according to the antennas and the value ranges from 0 to
30dBi.
DFS
DFS is only available in devices working in 5GHz including CPE510, CPE520 and
BS510.
Dynamic Frequency Selection (DFS) is used for radar avoidance and is supported
by the novel IEEE 802.11h wireless local area network standard
. Incorrect
settings may violate local regulations. It is recommended to enable the function
and choose Auto in the Channel/Frequency.
If the selected channel is DFS
channel, the device will start radar detection and avoid the channel used by
radar. If other channel is selected, there is no need to detect.
Transmit Power
You can
use the slider or manually enter the transmit power value. The
maximum transmit power may vary among different countries or regions.
NOTE: In most cases, it is unnecessary to select maximum transmit power.
Selecting larger transmit power than needed may ca
use interference to
neighborhood. Also it consumes more power and will reduce longevity of the
device. Select a certain transmit power is enough
to achieve the best
performance. You can use the Speed Test tool to find the best performance.
MAXtream
This setting is only available in the modes of Access Point and AP Router.
MAXtream is a proprietary technology of TP-LINK for Wi-Fi system. It is based on
TDMA (Time Division Multiple Access) so that data streams are transmitted in
strict order. MAXtream
aims to maximize throughput and minimize latency
especially in a multi-STAs circumstance. "Hidden nodes” problem can also be
eliminated with MAXtream enabled. W
e highly recommend you turn on
MAXtream in a large scale wireless deployment to achieve better performance.
- 59 -
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info