605840
61
Zoom out
Zoom in
Previous page
1/95
Next page
Chapter 6 Wireless Tab
Wireless Basic Settings
This section allows you to configure wireless basic settings, such as region, 802.11 mode, Transmit Power,
and data rates.
Region
Select your region from the drop-down list and agree to the Terms of Use in the
pop-up window. Available frequency channels and maximum transmit power
may vary across different countries.
NOTE:
Ensure you select a certain country to comply with local laws. Incorrect
settings may cause interference. Limited to local law of the United States, the
checkbox of region is not selectable.
Mode
Select the protocol standard used in the wireless network. With a frequency
band of 2.4GHz, CPE210/CPE220/BS210/OAP210 supports five wireless modes:
802.11b, 802.11g, 802.11n, 802.11b/g and 802.11b/g/n. You are recommended
to set the 11b/g/n mixed mode, and all of 802.11b, 802.11g and 802.11n wireless
stations can connect to the device. CPE510/CPE520/BS510 has a frequency band
of 5GHz, supporting 802.11a, 802.11n and 802.11a/n modes. We suggest to set
in 11a/n mode, allowing both 802.11a and 802.11n wireless stations to access
the device.
Channel Width
Select the channel width of this device. Options include 5MHz, 10MHz, 20MHz
and 20/40MHz (this device automatically selects 20MHz or 40MHz, and 20MHz
will be used if 40MHz is not available). Users select corresponding channel
width according to whether their devices support it. According to IEEE 802.11n
standard, using a channel width of 40MHz can increase wireless throughput.
However, users may choose lower bandwidth due to the following reasons:
1. Increase the available number of channels within the
limited total
bandwidth.
2. To avoid interference from overlapping channels occupied by other devices
in the environment.
3. Lower bandwidth can concentrate higher transmit power, increasing
stability of wireless links over long distances.
4. Subject to the channel width of root AP in Client/ Bridge/ Repeater/ Client
Router operation modes.
- 58 -
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TP-LINK CPE220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TP-LINK CPE220 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TP-LINK CPE220

TP-LINK CPE220 Installation Guide - English - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info