650607

Toyotomi Omni 230 - type C Manual

8
Zoom out
Zoom in
Previous page
1/18
Next page
FUELING
1. lnsert the straight tube of the manual fuel siphon into the kerosene (paraffin)
container. Remove the fuel tank cap on the heater, and insert the siphon’s flexible
hose into the fuel tank opening.
2. Turn the air vent knob on the top of the siphon clockwise to close the air vent.
3. To start the flow of kerosene (paraffin), squeeze the bulb of the siphon vigorously
six or seven times. Once the flow begins, it is no longer necessary to squeeze the
bulb. To avoid overfilling the tank, watch the fuel gauge. As the indicator enters the
red zone, stop the flow by turning the air vent knob counterclockwise.
NOTE: Be especially careful to avoid overfilling the tank with very cold kerosene
(paraffin); otherwise overflow might occur when the fuel warms up.
4. Remove the siphon carefully, allowing the excess kerosene (paraffin) to drain from
the tube back into container. Replace the fuel tank cap and tighten it securely. Be
sure to wipe away any spilled kerosene (paraffin) from tank or other heater parts.
CHECK BEFORE LIGHTING
1. LOCATE YOUR HEATER AWAY FROM WALLS AND AVOID DRAFTS
Allow at least one (1) m of clearance between the heater and walls, curtains, shelving or other combustible
materials. DO NOT operate your heater in drafty areas or locations where opening doors may create gusts of air.
Drafts or strong air currents may make flame unstable and affect heater performance.
2. LEVEL THE HEATER
The heater should be operated on a firm, Ievel floor.
NOTE:
lf your heater is not level, change Iocations. DO NOT attempt to prop it up
with books or other objects. An unlevel heater may burn with an uneven flame.
3. CHECK THE WICK LIFE EXTENDER
When you first use your new heater or after replacing the wick, check if the WICK
LIFE EXTENDER is on position
1. If not, readjust the wick life extender mechanism
to position
1 by following the instructions on page 9, ADJUSTMENT OF WICK
HEIGHT WITH WICK LIFE EXTENDER.
4. ENGAGE THE AUTOMATIC EXTINGUISHER
The automatic extinguisher is engaged automatically by turning the wick adjuster
knob clockwise. Check the operation of the automatic extinguisher before lighting
your heater. After turning the wick adjuster knob clockwise until it stops, turn the
manual shutoff counterclockwise to be sure the wick moves smoothly down.
7
F
E
USE KEROSENE ONLY
(PARAFFIN)
Use only clean Kerosene (paraffin).
NEVER use gasoline (petrol) or other flammable liquids.
ALWAYS extinguish heater before refill heater fuel tank.
Fuel heater outside the living area.
WARNING:
Omni 230 Type C_US.qxd 14.8.1 13:15 ページ 7
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toyotomi Omni 230 - type C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toyotomi Omni 230 - type C in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info