671194

Tower T19005 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Register online at www.towerhousewares.co.uk for your FREE extended guarantee.
10. To make sausage links, switch the Meat
Grinder off after you have lled the casing
with the length of one sausage. Tie a
knot at the end of the 2” of casing that is
overhanging.
11. Turn the Meat Grinder back and ll the
casing until it is approximately 2” from being
full.
12. Slide the sausage and casing off the
sausage attachment and tie a knot at
the open end of the casing. Link the
sausage by twisting the casing at intervals
(depending on the size you want each
sausage to be).
Note: The above instructions refer to natural
casings. Articial casings do not require cleaning
or soaking before use.
Recipes
SimplePork,AppleandCaramelisedOnion
SausagePatties
Making your own sausages allows you to
experiment with avours, control exactly what
goes in, and lets you season to your taste. To
make linked sausages follow the method noted
in the ‘Making Sausages with your Meat Grinder’
section. If you want to try something different
sausage patties taste just as good, and are even
quicker to make.
Ingredients
500g pork mince
1 red onion, peeled and nely chopped
1 tbsp. brown sugar
1 tbsp. balsamic vinegar
4 cloves of garlic, peeled and minced
2 small apples, grated
Handful parsley and oregano
1 tbsp. mustard powder
1 tbsp. seeded mustard
1 tsp. salt
Method
1. Place a large bowl in the fridge and allow it
to cool. This ensures the fat in the sausages
does not melt.
2. Put nely diced red onion in a hot, well-
oiled pan and cook on a low heat, until
golden. After around 15 minutes, add sugar,
balsamic vinegar and a pinch of salt. Cook
until the onions are sticky and thick. Set
aside and allow to cool.
3. Once the onions are cool, put them into
the large cooled bowl. Add all of the
ingredients. Lightly mix everything together.
Be careful to avoid over mixing.
4. Prepare the grinder by using a ne cutting
plate, securing into place with the xing
ring.
5. Place a large bowl underneath the horn of
the grinder to catch the meat.
6. Place the meat mixture on the hopper plate
and turn the grinder on.
7. Keep feeding the mixture into the grinder,
using the food pusher attachment.
8. Once nished, shape the meat into patties
and pan fry immediately, until cooked.
Alternatively, refrigerate the raw meat for up
to 24 hours before cooking, or freeze.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T19005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T19005 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info