Manual Tower T19005 (page 8 of 20) (English)

671194

Zoom out

Zoom in

1/20

3USINGYOURAPPLIANCE

Beforerstuse:

Ensure that the voltage indicated on the rating

label corresponds to the mains voltage in your

home.

Wash all parts (except the main body of the

appliance) in warm, soapy water and dry.

Before plugging in the appliance, make sure the

on/off switch is in the off position.

Assembly:

1. Take the horn and insert it into the head

inlet, slanted slightly downwards. Take the

fastening screw and screw it into the side of

the motor housing. Hold onto the horn and

turn the screw clockwise to fasten it into

place. (see Fig 1)

2. Fit the worm into the horn, with the shorter

end facing out. The longer end will set into

the motor housing loosely. (see Fig 2)

3. Place the cutting blade onto the end of

the worm, with the blades facing inwards

towards the inside of the horn. (see Fig 2)

NOTE: If the cutting blade is not t properly, the

meat will not grind.

4. Place the desired cutting plate on top of the

cutting blade. It will position onto the slots

either side on the horn. This will then hold

the worm in place. (see Fig 3)

5. Screw the xing ring tightly into place on

top of the cutting blade. Ensure not to over

tighten. (see Fig 4)

6. Place the hopper plate on to the horn and

t it into position. (see Fig 5)

7. Place the unit on a steady, dry surface.

NOTE: Ensure the air passages at the bottom

and side of the motor housing are not blocked at

any time.

Fig 1. Fig 5.

Fig 2.

Fig 3.

Fig 4.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tower T19005 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tower T19005 Manual

Product: