485654
29
Zoom out
Zoom in
Previous page
1/42
Next page
56
57
Operations
The Setting 2 menu
Item
p
q
Description
Projection
mode
Set the projection mode. Press
and select the projection mode using
p
q
.
Standard—standard forward facing projection.
Rear ceiling—inverts and reverses the image for ceiling mounted projection from behind the screen.
Rear—reverses the image for projection from behind the screen.
Ceiling—inverts the image for standard ceiling mounted projection.
Display time
Set the menu display time. Press
and select the display time using
p
q
.
Continuous/5 sec./15 sec./45 sec.
Background
Set the default background appearance. Press
and select the background using
p
q
.
Blue/None/Logo
Password
Enable or disable the password security feature
p.45
.
Key lock Enable or disable the key lock security feature. When enabled, the control panel on the
projector is locked—the menus can only be accessed using the remote control.
Press
and select On or Off using
p
q
.
DynamicBlack Enable or disable DynamicBlack. The DynamicBlack feature improves the appearance of black
areas of the projected image. Press
and select On or Off using
p
q
.
RC sensor
Enable or disable the front and reaer remote control sensors. Press and select the
sensor mode using
p
q
.
Both/Front/Rear.
Network
setting
Congure the network settings if the projector is connected to a network. Enable DHCP or
disable DHCP and enter network IP address information in the supplied elds.
Select Apply settings to conrm the network information
p.57
.
Standby mode
Select the desired standby mode. Press and select the standby mode using
p
q
.
Standard/Power-saving
PC control
Select the path for PC Control. Press and select the PC control path using
p
q
.
PC control/Network
Using the Setting menus (Continued)
Network settings
<DHCP>
If you set DHCP to Enable, the IP address of the projector is assigned automatically
by the DHCP server. If your network environment does not assign IP addresses
automatically, set DHCP to Disable, then set the following items manually.
Note
IP address and Subnet are required elds if DHCP is set to Disable.
<IP address>
When DHCP is set to Disable, consult with your network administrator for the settings
below and set the IP address manually.
An IP address is a unique number assigned to a device. The format is a string of four dot-
separated three-digit numbers. (Example: 111.112.xxx.xxx)
<Subnet>
A subnet mask is used to determine what subnet the IP address assigned to a device belongs to.
(Example: 255.255.xxx.xxx)
<Gateway>
This value specifies the IP address of the device, such as a router, to be used to access servers
outside the network. (Example: 111.112.xxx.xxx)
<DNS>
This value species the IP address of a Domain Name Server (DNS) if present.
(Example: 111.112.xxx.xxx)
<Apply settings>
Select Apply settings to conrm the projector’s new network settings.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-WX5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-WX5400 in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info