485654
28
Zoom out
Zoom in
Previous page
1/42
Next page
54 55
Operations
The Advanced menu
Item
p
q
Description
Computer 1 Computer 2 Computer 3
Y/PB/PR
Video
S-video
Noise
reduction
*1
Adjust the screen noise
reduction level.
Off/Low/Mid/High
Yes Yes Yes Yes Yes Yes
3D Y/C
separation
Enbale or disable 3D Y/C
separation.
On/Off
No No No No Yes No
Progressive Adjust the progressive mode.
Off/Still/Standard/Cinema
No No No Yes Yes Yes
Color matrix Set the default Color matrix.
Auto/RGB/SDTV/HDTV
Yes Yes Yes Yes No No
Film Set the Film mode.
Off/2-2/2-3 Auto/2-2/2-3
No No No Yes Yes Yes
*1: Noise reduction may not work depending on signal type.
Using the Adjust menus (Continued)
Using the Setting menus
The Setting menu contain the most often used settings during installation and options
to customize the general output of the projector. Three tabs are accessible through the
Setting menu; Setting 1, Setting 2, and Setting 3.
The Setting 1 menu
Item
p
q
Description
Keystone
Adjust the horizontal/vertical keystone values. Press
and adjust the keystone using
t
u
.
Lamp power
Set the lamp power. Press
and select the lamp power using
p
q
.
Low/Standard
Lamp mode
Set the lamp mode. Press
and select the lamp mode using
p
q
.
Dual/Lamp1/Lamp2
Lamp interval Set the period of time after which the lamp should be swapped when lamp select is not set
to Dual mode. Press
and select the lamp interval using
p
q
.
Off/1 week/4 week/2000H
Language Select one of the languages below to use for displaying the menu and messages
Press
and toggle the display language using
p
q
.
/ / / / / / /
(
)
Lens Shift Shift the lens using the projector's control panel.
Press
to display the Len shift window.
Press
p
qt
u
to shift the lens in the corresponding direction.
Zoom
Use the Zoom feature from the projector's control panel.
Press
to display the Zoom window.
Press
t
to zoom out and
u
to zoom in.
Focus
Use the Focus feature from the projector's control panel.
Press
to display the Focus window.
Adjust the focus by pressing
t
and
u
.
Notes
For lamp protection, [Lamp mode] cannot be changed its setting mode right after you
have switched the lamp mode or the lamp has turned on. If it is the case, allow some
time before changing the mode.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-WX5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-WX5400 in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info