485654
21
Zoom out
Zoom in
Previous page
1/42
Next page
40
41
Operations
3
To alter the picture size,
press Menu and select the
[Adjust] menu using
p
or
q
. Press Enter to open the
[Adjust] menu. Press
t
or
u
to select [Display setting]
followed by
p
or
q
to select
[Screen]. Press Enter.
4
The [Screen] window is
displayed. Select the desired
picture size using
p
or
q
and press Enter.
When nished, press
[Return] to go back to the
projected image.
8
Adjusting the volume
The volume can be adjusted with the
remote control unit.
1
Press the Vol +/- buttons
on the remote control. The
volume bar is displayed on
screen.
2
Use the Vol +/- buttons to adjust the level.
Notes
Volume can also be adjusted from the Volume in the Menu.
Basic operations (Continued)
Notes
Note that lamp characteristics may rarely cause the brightness to uctuate slightly.
A lamp is consumable item. If used for extended periods, images will appear dark, and the
lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of
the lamp depends on conditions of use.)
The DLP
®
chip is made using extremely advanced technology, but there may be black spots
(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please
note that these are not malfunctions.
Although this projector supports a wide range of RGB signals
p.78
, any resolutions not
supported by this projector (WXGA) will be expanded or shrunk, which will affect image
quality slightly. To view high-quality images, it is recommended that the computer’s
external output should be set to WXGA resolution.
With some models of computer having LCD displays or the like, displaying images
simultaneously on the projector and the monitor’s display may prevent the images from
displaying properly. If this happens, turn off the computer’s LCD display. For information on
how to turn off the LCD display, see the owner’s manual of your computer.
If no signal is being input from the connected equipment or signal input is stopped while
projecting, the “No signal” will appear.
If a signal not supported by the projector is input, “No signal” message will appear.
If an unavailable operation button is pressed, This function is not supportedwill appear.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-WX5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-WX5400 in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info