485654
23
Zoom out
Zoom in
Previous page
1/42
Next page
44
45
Operations
Freezing the image (Freeze)
This function is used to pause or freeze a video during a presentation.
Press the remote control’s FREEZE button.
The picture will pause. To release the freeze function, press the
FREEZE button again.
Notes
Other operations will also release the freeze.
Even if an image is frozen on the projector, the pictures are
running on the video or other equipment.
Using this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and
listening may infringe the copyright protected by the copyright laws.
Setting the password
How to set password (from [Off] to [On])
To set the security password, refer to the
following guide.
1
Press the Menu button on the projector
or remote control to display the Main
Menu. Scroll to the [Setting] menu using
p
or
q
and press Enter.
2
Select [Setting 2] using
t
or
u
and
press Enter.
3
Select [Password]
using
p
or
q
and
press Enter.
4
Select [On] then [OK] and press
Enter.
The password entry screen is displayed.
5
Enter a password between 4 and 10
characters using the arrow keys of
the remote control. Press Enter.
6
Re-enter the password for
conrmation and press Enter.
7
Select [OK] using the remote control and
press Enter to enable the password.
Note
Please do not forget your password. If you forget the password, you can not release the
password by yourself.
In such a case, please contact your dealer.
Remote
control
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using the arrow keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is wrong, a message will appear
prompting you to re-enter the password, and the password entry screen is displayed
again. If you enter an incorrect password for more than 5 times, the projector will
automatically power off and enter standby mode.
Note
When the password setting is [On], the password will be enabled only when the
power is turned on for the rst time after the main power switch has been on.
The password function will not be activated if the power backed on while it is
standby mode without turning off the main power switch.
How to set password (from [On] to [Off])
1
Select [Password] in the
[Setting 2] menu and press
Enter.
The password entry screen is
displayed.
2
Enter the password using
the arrow keys of the remote
control.
3
Select [Off] and press Enter
to disable the password.
Using handy features (Continued)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba TDP-WX5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba TDP-WX5400 in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info