497452
12
Zoom out
Zoom in
Previous page
1/24
Next page
–11–
NOTE
For the cooling operation, the set temperature will
automatically increase 1 degree / hour for 2 hours
(maximum 2 degrees increase).
For the heating operation, the set temperature will
decrease.
During group control operation, the set temperature and
the fan speed are not automatically adjusted. Only off
timer function is activated.
Sleep timer operation
To start the sleep timer (OFF timer) operation.
1 Press the SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer
operation.
Adjusting airflow direction
Adjust the airflow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
Adjust the vertical airflow using the remote controller.
Adjust the horizontal airflow manually.
Adjust the vertical airflow
The air conditioner automatically adjusts the vertical
airflow direction in accordance with the operating
conditions when AUTO or A mode is selected.
To set the airflow direction you desire
Perform this function when the air conditioner is in
operation.
1 FIX button
Keep pressing or pressing briefly the FIX button on
the remote controller to move the louver in the
desired direction.
In subsequent operations, the vertical airflow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
Operating angle of vertical airflow louver will be different
during cooling, dry and heating operation.
PRESET
QUIET
SWING
TIMER
ON
FILTER
CHK
CLOCK
OFF
CLR
SLEEP
SET
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
PRESET
QUIET
SWING
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
To automatically swing the airflow
direction
Perform this function when the air conditioner is in
operation.
1 SWING button
Press the SWING button on the remote controller.
To stop the function, press the SWING button.
CAUTION
The FIX and SWING buttons will be disabled when the
air conditioner is not in operation (including when the
ON timer is set).
Do not operate the air conditioner for long hours with
the airflow direction set downward during the cooling
or dry operation.
Otherwise, condensation may occur on the surface of
the vertical airflow louver and cause dew dripping.
Do not move the vertical airflow louver manually.
Always use the FIX button.
If you move the louver manually, it may malfunction
during operation.
If the louver malfunctions, stop the air conditioner
once, and restart.
When the air conditioner is started immediately after it
was stopped, the vertical airflow louver might not
move for 10 seconds or so.
Louver operation is limited when performing group
control. (see page 16)
Adjust the horizontal airflow
Preparation
Take hold of the lever on the horizontal airflow louver
and move them to adjust the airflow direction as
required.
You can adjust the airflow at the left, and right
locations of the louver.
PRESET
QUIET
SWING
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
1
21-EN 22-EN
+001111055901_01EN.book Page 11 Saturday, October 8, 2011 10:44 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAV-SM566KRT-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAV-SM566KRT-E in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info