497452
10
Zoom out
Zoom in
Previous page
1/24
Next page
–9–
Automatic operation
(auto changeover)
Start
1 START/STOP button ( )
Press this button to start the air conditioner.
2 Mode select button (MODE)
Select A.
3 Temperature button ( )
Set the desired temperature.
4 Fan speed button (FAN)
Select one of LOW , LOW
+
,
MED , MED
+
, HIGH .
The OPERATION lamp (green) on the display
panel of the indoor unit lights.
The operating mode is selected in accordance with
the room temperature and operation starts after
approximately 3 minutes.
If the “A” mode is uncomfortable, you can select the
desired conditions manually.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
Timer operation
Use the wired remote controller for timer setting if it is
also in use.
ON timer and OFF timer
Setting TIMER
1 Push ON / OFF TIMER button ( or ) during
operation.
Press the ON or OFF TIMER buttons as required.
The previous timer setting is displayed and
flashes along with ON / OFF timer display.
Set the timer to the desired time.
Each press of the TIMER button changes the time
in ten minute steps.
Pressing the TIMER button continually changes
the time in one hour step.
2 SET button
Press the SET button to set the timer.
The timer time is indicated and the timer starts.
Cancelling TIMER
3 CLR button
Press the CLR button to cancel the timer
setting.
PRESET
MODE
TEMP
FAN
2
3
1
4
TEMP
PRESET
QUIET
SWING
TIMER
ON
FILTER
CHK
CLOCK
OFF
CLR
SLEEP
SET
FIX Hi-POWER
COMFORT
SLEEP
MODE
TEMP
FAN
2
3
1
ON
OFF
SET
SET
CLR
CLR
CAUTION
When you select the timer operation, the remote
controller automatically transmits the timer signal to
the indoor unit at the specified time. Therefore, keep
the remote controller in a location where it can
transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will occur.
If you do not press the SET button within 30
seconds after setting the time, the setting will be
cancelled.
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON /
OFF button of the remote controller.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section “Setting the clock”
and then set the timer.
Combined timer (Setting both ON
and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in
the morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next
morning.
Setting combined TIMER
1 Press the OFF TIMER button to adjust the
OFF timer.
2 Press the ON TIMER button to adjust the
ON timer.
3 Press the SET button.
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner
when you wake up and stop it when you leave the
house.
Example:
To start the air conditioner next morning and stop it.
Setting combined TIMER
1 Press the ON TIMER button to adjust the
ON timer.
2 Press the OFF TIMER button to adjust the
OFF timer.
3 Press the SET button.
Either ON or OFF timer function which is closer to
the current time, is activated first.
If the same time is set for both ON and OFF timers,
no timer operation is performed.
Also, the air conditioner may stop operating.
Every day combined timer
(setting both ON and OFF timer
simultaneously and activate every
day)
This feature is useful when you want to use combined
timer at the same time every day.
Setting combined TIMER
1 Press the ON TIMER button to adjust the
ON timer.
2 Press the OFF TIMER button to adjust the
OFF timer.
3 Press the SET button.
4 After step 3, an arrow mark ( or ) flashes
for about 3 seconds and during this flashing,
press the SET button.
During the every day timer is activating, both arrows
( , ) are indicated.
SET
Operation
Stop
Operation again
OFF
ON
SET
Operation
Stop Stop
ON
OFF
SET
ON
OFF
SET
SET
17-EN 18-EN
+001111055901_01EN.book Page 9 Saturday, October 8, 2011 10:44 AM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Toshiba RAV-SM566KRT-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Toshiba RAV-SM566KRT-E in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info