807538
13
Zoom out
Zoom in
Previous page
1/63
Next page
24 25
8.2 Language setting
You can change the language selected under Main menu Settings Language.
Both submenus are at the end of their respective lists to enable this setting to be changed
even if the language has been altered accidentally.
8.3 Maximum speed
You can set the maximum boat speed for the circular display in Speed mode on the boat.
You will find the corresponding setting menu under:
Main menu Settings Display Speed
Remember that the speed displayed refers to travel over ground.
9. Operation
9.1 Setting off
- Remove and stow the charging cable, if connected.
- Put the throttle into neutral.
- Start the system by pressing the on/off switch.
- As soon as the neutral icon on the display turns white, the system is ready to use
Tip: Test the movement function before you cast off by accelerating slightly.
9.2 Charging
To charge your Torqeedo drive system, please switch it off at the throttle and plug in
the charger.
Before setting off, always ensure that the charging cable is unplugged and stowed safely.
If you are using a Torqeedo fast charger, you can set the maximum AC charging current
in the event that the land power installation is not adequately protected, for example.
You will find the corresponding setting menu under: Main menu Settings Charging
Charging current.
9.3 Hydrogeneration
All Torqeedo Fixed Pod motors (FP) have the option to recover energy through the drive
system while sailing. This function is disabled by default. It can be activated as follows:
Main menu Hydrogeneration.
For further information about hydrogeneration, please see the operating instructions
for your motor.
9.4 TorqTrac
This throttle has a Bluetooth interface. This allows the Torqeedo TorqTrac app to be used
without any other accessories. Enable the Bluetooth transmission function (Main menu
Settings Bluetooth) and connect to your Torqeedo drive system through the app.
9.5 Wi-Fi
The Wi-Fi function is used to carry out software updates, but is not required for normal
operation of the throttle. It is therefore advisable to disable this function (Main menu
Settings Wi-Fi).
9.6 Troubleshooting
In the event of a warning or fault, messages are shown on the display consisting of
an icon and a fault text. The icon displayed indicates the component in question and in
some cases the problem.
The fault text provides a brief explanation of the problem and the restrictions resulting
from it.
Pressing the button displays information about troubleshooting and a fault code.
Pressing the button confirms and clears the fault message.
All fault messages can be viewed at any time under: Main menu Message log.
If you are unable to rectify the fault with the aid of the information in the fault text or
the operating instructions for the component in question, please consult Torqeedo
Service or a service partner, citing the fault code.
DE
EN
FR
IT
ES
PT
DA
NL
SV
FI
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo TorqLink Throttle - 1976-00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo TorqLink Throttle - 1976-00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info