807538
11
Zoom out
Zoom in
Previous page
1/63
Next page
20 21
5.2 Safety equipment
Emergency stop magnetic pin
Removal of the emergency stop magnetic pin causes the motor to shut off immediately.
The cord from the emergency stop magnetic pin must always be placed around the
driver’s wrist so that the motor shuts off if the driver falls overboard.
Electronic throttle control
The electronic control system prevents the motor from starting if the throttle is not
in neutral during a system start. Move the lever to neutral to start.
5.3 Maintenance information
Use only a soft cloth and mild detergents that are compatible with plastic materials
(e.g. washing-up liquid) for cleaning. Do not use any chemicals or solvents.
Always cover the display with the display protective cover when the throttle is not in use.
6. Installation and assembly
6.1 Assembly
Mount the throttle using the fixing points provided in a suitable position on
the boat and complete the following assembly steps:
- Release the four screws on the top of the throttle (3) and remove the mounting
plate underneath.
- Drill the holes required to fit the throttle – the mounting plate serves as a template.
See Figure (F) on page 2 in this connection.
• Standard hole pattern for M5 screws (11)
• Standard hole pattern for ¼” screws (12)
• Hole pattern as for earlier model, 1918-00 (13)
• Alternative cable opening (15)
- Fix the mounting plate firmly to the boat with at least two screws.
- Position the throttle on the mounting plate and feed the TorqLink cable
through in the required position.
- Fit the throttle to the mounting plate with the four screws on the top of the housing (3)
(torque 1.5 Nm ± 0.5).
- Ensure that your Torqeedo system is switched off, then connect the cable to
the TorqLink network.
6.2 Connection to the overall system
The throttle must always be connected to one end of the TorqLink backbone and
the motor to the other, as the terminations are located in these two components.
All other components are integrated into the backbone via spurs (T-cables).
- Always mount the throttle in the boat’s direction of travel.
- Do not mount near the compass. The throttle has a magnet that could
disrupt the compass.
- Ensure there is adequate space for the lever movements when fitting.
- Do not mount the throttle near sources of magnetic interference.
- Observe the minimum bending radius of the TorqLink cable of 40 mm.
- Mount the components in dry conditions only.
Backbone
Spur
DE
EN
FR
IT
ES
PT
DA
NL
SV
FI
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo TorqLink Throttle - 1976-00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo TorqLink Throttle - 1976-00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info