807538

Torqeedo TorqLink Throttle - 1976-00 Manual

12
Zoom out
Zoom in
Previous page
1/63
Next page
23
22
Keep the cable lengths and plug connections to a minimum in your boat installation.
Also pay careful attention to correct insertion and screw fitting of all plugs.
This throttle may be used only in conjunction with a TorqLink-compatible motor and
Power 48-5000 batteries.
7. Commissioning
System initialisation
Once the system has been fully installed in the boat, the initial start must be carried out
with the charge pulse.
To do this, insert the charger plug into a suitable socket, then switch on the mechanical
main switch or the system at the throttle. It is advisable to charge the batteries fully
before continuing with commissioning. If you are using a fast charger, you can then
reduce the maximum charging current on the menu (Main menu Settings Charging
Charging current).
Switching the system on
Then switch on the mechanical main switch, attach the emergency stop magnetic pin and
press and hold the I/0 button until the throttle display comes on.
- Do not put the system into operation until all components are fully
and correctly fitted and connected. Arrange for a specialist to check
the installation first.
- The boat must be in the water for commissioning. Ensure that there is no one in
the water near the boat prior to commissioning.
Throughout the entire commissioning process, the boat must have a secure line
mooring to land. The commissioning process must be fully completed without
faults before using the Torqeedo drive for the first time.
- Always use the latest software for this throttle. You can carry out a software
update yourself using a smartphone. Further information about available updates
and the update process can be found on the product page for the throttle at
www.torqeedo.com.
Calibrating the throttle
Main menu Settings Calibration.
Start calibration with the button and follow the instructions.
Checking the message log
You can open the message log under: Main menu Message log.
Check that there are no warnings (yellow) or faults (red) in the message log. If there are
no messages of this sort, check the system layout and restart the system. If there are still
warnings or faults present, follow the instructions on the display and in the operating
instructions for the relevant component.
If you cannot rectify faults in this way, contact Torqeedo Service.
Checking the GPS function
Check that a number appears in the display area for the GPS speed (e.g. 0 km/h or 0 kn).
In order to ensure perfect GPS reception, the boat should be out in the open (and not
under a bridge, for example, or in a hall).
Checking the drive function
Move the throttle very slightly forward and back and check that there is tension on the
corresponding mooring line. Be careful of surrounding boats and structures as you do so
in order to avoid damage.
Checking the safety shut-off
Check that the safety shut-off is functioning correctly by removing the emergency stop
magnetic chip from the throttle after moving the lever very slightly.
Check that the drive power has been shut off.
8. Settings
8.1 Screen brightness
The screen brightness can be changed under: Main menu Brightness.
This is the first item on the list, to ensure it can be found even if the brightness is set too
low. To find it, press the button several times (approx. 6x) to ensure that you are on the
main screen. Then press the button 3x and press and hold the button until you can
see the display on the screen.
DE
EN
FR
IT
ES
PT
DA
NL
SV
FI
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo TorqLink Throttle - 1976-00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo TorqLink Throttle - 1976-00 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info