807516
73
Zoom out
Zoom in
Previous page
1/92
Next page
73
DE EN
5. Restart the system.
»The motor and batteries now communicate directly with each other. You
can, among other things, read the state of charge of the batteries on the
display.
NOTE! When using the Cruise system with a different battery bank, the enumera-
tion must be carried out again.
NOTE! Torqeedo Power 48-5000 will be displayed as 2 batteries.
7.1.3 Setting forwards/reverse motion
You can adjust the direction of tiller/accelerator lever rotation for forwards/re-
verse motion according to your needs.
NOTE! Depending on the conguration and the accelerator lever used, the
settings menus differ for the Cruise models without tiller. The corresponding
information can be found in the operating manual for the respective accelerator
lever.
Setting forwards/reverse motion (only Cruise models with tiller)
1
setup cal.
1. Press the CAL button (1) for 10 seconds.
»“cal up” is displayed.
2. Turn the tiller forward to full throttle in the desired direction of rotation.
3. Press the CAL button.
»“cal stp” is displayed.
4. Turn the tiller to the neutral position (N).
5. Press the CAL button.
»“cal dn” is displayed.
6. Turn the tiller backward to full throttle in the desired direction of rotation.
7. Press the CAL button.
»Setting forwards/reverse motion is completed.
8 Operation
WARNING
Danger to life due to boat not being manoeuvrable! This can result in moder-
ate or severe bodily injuries.
Find out about the intended travel area before you set off and observe
the forecast weather and sea conditions.
Depending on the size of the boat, always have the necessary safety
equipment ready (anchor, paddle, means of communication, auxiliary
drive if necessary).
Check the system for mechanical damage before starting to drive.
Only drive with a system that is in perfect working order.
8.1 Operation in emergency situations
You can stop your Torqeedo motor in several ways in an emergency. The system
has appropriate safety features for this purpose. Depending on the conguration,
the system has either an emergency stop magnetic chip or a kill switch cord with
switch or an emergency kill switch.
Please note that the type of stop impacts the restart.
Set the remote throttle/tiller to the neutral position to stop the motor.
»To continue travelling, you can simply give forwards/reverse motion again.
Pull off the emergency stop magnetic chip to stop the motor.
»To continue travelling, replace the emergency stop magnetic chip.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 6.0 R-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 R-T in the language / languages: English, German as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 R-T

Torqeedo Cruise 6.0 R-T User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 R-T User Manual - French, Italian - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info