807516
75
Zoom out
Zoom in
Previous page
1/92
Next page
75
DE EN
Tilting down the motor
Lock
Tilt/
Auto kick-up
2
1
NOTE! Only set the tilt lock lever to the “Lock” position after tipping down.
1. Tilt the motor downwards, to do this lift the motor and then pull the tilt
lever (1). Slowly lower the motor until the end position is reached.
2. Set the tilt lock lever to the “Lock” position.
8.2.2 Motor locking
If you want to operate your Torqeedo motor without steering function, e. g.as a
drive for sailboats, you can lock it in place.
Use the supplied ISO4762 M8x100 A2 70 screw for locking.
1
1. Set the motor to the desired position.
2. Install and tighten the M8x100 screw (1).
»The motor is locked.
3. Remove the screw to be able to move the motor freely again.
TIP! Protect the thread from water penetration with e.g. some household
petroleum jelly when you have removed the screw.
8.2.3 Before travelling
Observe the following points before each use of your Torqeedo system to ensure
a safe trip.
Familiarise yourself with the travel area before setting off, as the range
shown in the onboard computer does not take into account wind, current
and direction of travel, and plan a sufcient buffer for the required range.
If there is visible damage to components or cables, the Cruise system must
not be switched on.
Ensure that everyone on board is wearing a lifejacket.
Attach the emergency stop magnetic pin lanyard or kill switch cord to the
skipper's wrist or lifejacket before launching.
The battery state of charge must be checked at all times while on the move.
Only apply the emergency stop magnetic chip or the kill switch cord when
there are no more people in the water (e.g. after bathing breaks), or remove
it immediately if people fall into the water to stop the drive.
Also observe all information from the “Safety” and “Before use” sections.
8.2.4 Switching on/off Cruise models with Tiller
Switch on
1. Set the battery main switch to the ON position.
2. Press the ON/OFF” button on the Tiller for 1 second to switch on the
system.
Switching the system off
1. Press the ON/OFF” button for approx. 1 second to switch off the system.
»The system shuts down, the battery remains switched on.
2. Set the battery main switch to the off position.
»A small self-discharge takes place.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 6.0 R-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 R-T in the language / languages: English, German as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 R-T

Torqeedo Cruise 6.0 R-T User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 R-T User Manual - French, Italian - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info