807516
72
Zoom out
Zoom in
Previous page
1/92
Next page
72
DE EN
Setting the battery type and units of measurement (Cruise models with Tiller
only)
12
setup cal. 3
NOTE! When setting the battery bank size, note that, for example, a battery
bank with 2 serially connected batteries of 12 volts and 200 Ah each has a total
capacity of 200 Ah at 24 volts (and not 400 Ah).
1. Switch on the system, see chapter “Switching on and off”.
2. Press the “setup” button (1) to enter the set-up menu.
»The unit for the remaining range is displayed.
3. Select the desired unit with the CAL button (2) and conrm your selection
with the “setup” button.
»The selection is saved and the menu automatically switches to the speed
indicator setting.
4. Select the desired unit with the CAL button and conrm your selection with
the set-up button.
»The selection is saved and the menu automatically switches to the battery
status display setting.
5. Select the desired unit with the CAL button and conrm your selection with
the set-up button.
»The selection is saved and the menu automatically switches to the battery
bank size setting.
6. Set the size of the battery bank (Ah) by turning the accelerator lever of the
tiller (3) and conrm your selection with the “setup” button.
»The selection is saved and the set-up menu is closed.
»Settings completed.
NOTE! The capacity display in percent and the remaining range are only possible
after the rst battery calibration.
7.1.2 Enumerating the battery (Torqeedo batteries only)
21
setup cal.
Only for Cruise 3.0 and 6.0 models with the following item numbers:
1260-00, 1261-00, 1262-10, 1263-10, 1264-00, 1265-00, 1266-00, 1267-00, 1268-00.
To set up communication between the battery and the outboard motor, the bat-
teries must be registered once with the system.
1. Turn the battery main switch of your system to the “ON” position.
2. Switch the system on to turn on the batteries.
3. Switch off the system, taking care not to press the ON/OFF button (1) for
more than 1 second so as not to switch off the batteries again.
4. Press the ON/OFF” button (1) rst and then the CAL button (2) in quick suc-
cession. The CAL button must be pressed while the system is booting up. In
this phase, the display shows all symbols simultaneously.
»The components of the system connect to each other. The display shows
ENU (for enumeration), the progress in percent and the number of batteries
found.
»Enumeration is completed when progress reaches 100%.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 6.0 R-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 6.0 R-T in the language / languages: English, German as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 6.0 R-T

Torqeedo Cruise 6.0 R-T User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 6.0 R-T User Manual - French, Italian - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info