807535
65
Zoom out
Zoom in
Previous page
1/92
Next page
65
DE EN
8. Make sure that sealant leaks out around the sealing surfaces; if this is not
the case, repeat the procedure.
9. Remove leaking sealant and tape before the sealant cures.
10. Allow the sealant to cure according to the manufacturer's instructions.
6.4.2 Installing / removing the motor
CAUTION
Danger of injury due to high component weight. This can result in minor or
moderate bodily injuries.
Do not lift heavy components alone.
Use suitable lifting gear if necessary.
Installing the motor
1
2
3
NOTE! Do not lift or hold the motor by the cables, but only by the housing.
1. Replace the sealing rings (1) after each disassembly.
2. If necessary, apply salt-water-resistant lubricant to the sealing rings and the
shaft tube (2), taking care not to apply lubricant to the diaphragm (3).
NOTE! A defective membrane (3) can lead to material damage due to water
ingress. Be careful not to damage the membrane.
10
7
6
8
9
5
4
3. Position the sealing rings (4) and the clamp (5) and install the screws (6),
but do not tighten them yet.
4. Insert the cables (7) through the ange pipe (8) and carefully insert the shaft
pipe (9) into the ange pipe, taking care not to damage the sealing rings
and the diaphragm.
5. Position the motor on the mounting ange (10), observing the mounting
direction.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 3.0 FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 3.0 FP in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 3.0 FP

Torqeedo Cruise 3.0 FP User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 3.0 FP User Manual - French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info