483955
7
Zoom out
Zoom in
Previous page
1/52
Next page
Topcom Twintalker 5010 7
Topcom Twintalker 5010
ENGLISH
13.9 iVOX Selection
The PMR is capable of intelligent voice activated (iVOX) transmission. In iVOX mode,
the radio will transmit a signal when it is activated by your voice. iVOX operation is not
recommended if you plan to use your radio in a noisy or windy environment.
13.9.1 Activating iVOX
13.9.2 De-activating iVOX
Switch off the PMR (press the -button for three seconds).
Switch on the PMR again (press the -button for three seconds). The
iVOX icon will be gone.
13.9.3
Adjusting the iVOX level
13.10 Channel scan
Channel scan performs searches for active signals in an endless loop from channel 1
to 8 including the CTCSS codes..
13.11 Multi channel scan (group scan)
It is possible to scan only a specific group of channels only.
13.11.1 Selecting the group scan channels
Each channel can be programmed as a member of this group.
13.11.2 Activating the group scan
Switch off the PMR (press the -button for
three seconds)
Press-and-hold the PTT-button
while switching on
the PMR by pressing the -button for three
seconds
The iVOX-icon appears
Press the -button
three times.
Use the -button or -button to set the
desired level.
1 - High ambient noise
2 - Normal ambient noise
3 - Low ambient noise
Press the PTT-button
to confirm and return to
stand-by mode.
9
12
9
9
9
When you use the PMR with the optional earpiece (see
chapter 14), the iVOX function will be disabled as soon as
you plug in the earpiece connector.
iVOX mode will be disabled when you press the PTT-button
.
The iVOX-icon will blink while disabled.
To enable iVOX again, press the PTT-button
briefly.
12
12
9
5
10
12
Press the MON\ -button briefly to activate
channel scan. The channel scan icon is displayed.
When an active signal (one of 8 channels with CTCSS
code) is detected, you will hear the conversation.
Press the PTT-button
to start communicating over
the active channel. If you don’t press the PTT-button
, channel scan will resume after 5 seconds if there
is no more activity.
Press the -button
or -button to bypass
the current channel and continue to search for another
active channel.
Press the
MON\ -button briefly to deactivate
channel scan.
Select a channel using the -button or -
button .
Press the -button six times.
Press the -button
or -button to enable
(Y) or disable (-).
Press the PTT-button
to confirm and return to
stand-by mode.
Repeat this action for each channel you want to add or
remove from the group scan.
Press the -button seven times.
Press the -button or -button to enable
(Y) or disable (-).
Press the PTT-button
to confirm and return to
stand-by mode.
Press the
MON\ -button briefly to start the
group scan. The channel scan icon is displayed.
Press the
MON\ -button briefly again to stop
the group scan.
4
12
12
5
10
4
5
10
9
5
10
9
5
10
12
4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Twintalker 5010 - RC 6402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Twintalker 5010 - RC 6402 in the language / languages: English, German, Dutch, French, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info