483955
5
Zoom out
Zoom in
Previous page
1/52
Next page
Topcom Twintalker 5010 5
Topcom Twintalker 5010
ENGLISH
door. Or install 3 ‘AAA’ alkaline or rechargeable batteries following the polarity
as shown.
4. Re-install the battery cover and belt clip (see chapter 8.1).
9 Charging batteries
When NiMh battery packs are installed, the desktop charger provides drop-in charging
convenience.
1.Put the desktop charger on a flat surface.
2.Plug the supplied adapter into the electric socket. Pay
attention to the mentioned voltage and compare this with
the indications of the power supply. Connect the low
tension plug at the end of the cable with the connector
at
the backside of the desktop charger.
3.Put the PMR in the charger as indicated.
4.The charging LED will turn on if it’s properly inserted
and charging.
It will take about 12 to 14 hours to fully charge the
batteries. There is no indication on the display when the
batteries are being charged.
10 Battery charge level
The battery charge level is indicated by the number of squares present inside the
battery icon on the LCD display.
Battery full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery charge level is low, a beep will be
heard.
11 Description
See folded cover page - illustration 1
1. Earpiece connector
2. LCD display
3. Volume up button
4. Monitor / scan button MON /
5. Up button
6. Microphone
7. Optional power supply connector
8. Speaker
9. Menu / on-off / unlock button /
10. Down button
11. Call button
12. Push to talk button PTT
13. Volume down button
14. Power / transmission LED
15. Antenna
12 LCD display information
See folded cover page - illustration 2
16. Antenna icon
17. Key lock icon
18. Scan icon
19. Roger beep icon
20. CTCSS code
21. VOX indication
22. Channel number
23. Battery charge level indication
13 Using the Twintalker 5010
13.1 Turning the unit on/off
The device can also operate with 3 x AAA NiMh batteries or with 3
x AAA Alkaline batteries.
3 x AAA Alkaline batteries cannot be charged with the charger.
+
+
+
+
To turn on:
Press and hold the -button for 3 seconds.
The unit will “beep” and the LCD display will display
the current channel.
To switch off:
Press and hold the -button for 3 seconds.
The unit will “beep” and the LCD display will turn
blank..
If the segments and icons of the displays are shown in light grey
in this user guide, it indicates that they are blinking and/or
selectable.
9
9
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Twintalker 5010 - RC 6402 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Twintalker 5010 - RC 6402 in the language / languages: English, German, Dutch, French, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info