462231
17
Zoom out
Zoom in
Previous page
1/157
Next page
English
17
Managing multiple handsets
Modern devices are equipped with both functions which can be changed depending on the
application. DTMF is required for programming or control functions, for example, if the device is
operated on a PBX. If pulse dialling is used, malfunctions can occur on PBXs during normal
operation because the system interprets the pulse dialling signals incorrectly.
8 Managing multiple handsets
8.1 Adding a new handset
You can register new handsets on the base if these handsets support the DECT GAP protocol. The
base can support a maximum of 5 handsets. If you already have 5 handsets, and you wish to add
another one or change one handset, you must first delete a handset, then associate the new handset.
8.2 Delete a handset
9 Reset the phone
It is possible to return the phone to the original default configuration. This is the configuration which
was installed when you first received the telephone. After the reset all your personal settings and
call list entreis will be deleted, but your phonebook remains.
To return to default settings:
1 Enter the menu by pressing the menu key.
2 Select “ADVANCED SET” and confirm.
3 Select “DIAL MODE” and confirm.
4 Select “PULSE” or “TONE” and confirm.
Only needed when you have deregistered a handset or when you bought a new one.
1 Enter the menu by pressing the menu key.
2 Select “ADVANCED SET” and confirm.
3 Select “REGISTER” and confirm.
4 Enter the 4-digit system PIN and confirm.
5 Press and hold the paging-key on the base for 5 seconds.
DECT GAP Profile only guarantees that basic calling-functions will work
correctly between different brands/types. There’s a possibility that certain services
(like CLIP) will not work correctly.
1 Enter the menu by pressing the menu key.
2 Select “ADVANCED SET” and confirm.
3 Select “UNREGISTER” and confirm.
4 Enter the 4-digit system PIN and confirm.
5 Select the handset you want to remove and confirm.
1 Enter the menu by pressing the menu key.
2 Select “ADVANCED SET” and confirm.
3 Select “RESET” and confirm.
4 Confirm again.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BUTLER E751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BUTLER E751 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 10,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info