462231
18
Zoom out
Zoom in
Previous page
1/157
Next page
18
Answering machine
10 Answering machine
The Butler E751 has a built-in digital answering machine with a recording capacity of 15 min. This
answering machine can be controlled by the base and by the handset. The answering machine can
be operated remotely and features the possibility of recording two outgoing messages (Message 1
and Message 2).
10.1 Answering machine settings
Most settings can also be done on the base but some settings are controlled by the handset.
Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages:
The volume can be set from 0 to 5. If the volume is set to the lowest position there will be no
audible output during call screening and during remote interrogation, but there will be a level 1
output for other operation.
Turning answering machine on/off
If the answering machine is on, the 7-segment counter (21) on the base will light up continuously
(or blink when there are new messages) and the machine will automatically pick up the line after
a number of rings (see “ Setting number of rings (Answer delay)”). On the handset the -icon
will be show (or blink when there are new messages).
If the answering machine is off, the answering on/off LED (21) on the base will not lit and the
-icon will not been shown on the handset display.
To turn the answering on/off from the base.
To turn the answering on/off from the handset:
Setting number of rings
(Answer delay)
The number of rings after which the answering machine will answer calls can be set from 3 to 9
and “Economy”. The standard setting is 5 rings. In “Toll saver” mode, the machine will answer
after 6 rings if there are no new messages, and after 2 rings if there are new messages. If there are
no new messages and you call your machine to check your messages remotely (see “10.3 Remote
operation”), you can hang up after the 2nd ring. You do not need to pay connection fees and you
know that you don’t have any new messages.
All messages and settings are stored on flash-memory and will not be erased when
the adapter is unplugged. Only the day/time settings will be erased.
Press the base volume keys during playback to increase or to decrease.
1 Press the on/off key on the base to switch on the answering machine.
2 A voice confirms the setting and playback the active outgoing message.
3 Press the on/off key again to switch off the answering machine.
1 Enter the menu.
2 Select “ANSW MACHINE and confirm.
3 Select “ANSW, ON/OFF” and confirm.
4 Select “ON” or OFF” and confirm.
Even if the answering machine is off, the machine will automatically pick up after
10 rings in order to enable remote activation (see “10.3 Remote operation”).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom BUTLER E751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom BUTLER E751 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 10,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info