462213

Topcom Butler 200 Manual

32
Zoom out
Zoom in
Previous page
1/46
Next page
R e m a r k :
This function does not allow you to have an intercom conversation between the base
station and the handset. Only a ringer sound can be activated.
8.15. CHANGING THE PIN-CODE OF THE HANDSET
By means of the PIN-code (Personal Identification Number) you can protect your hand-
set from the unauthorised changing of your settings. Standard this PIN-code has been
set to 0000. This can be changed as follows:
1 xxxx * #
(xxxx= current PIN-code)
- - - - - - - -
appears on the display.
Enter the new 4-digit PIN-code t w i c e and press the set button to save this new
P I N - c o d e .
Make sure that you do not forget the PIN-code of your handset.
8.16. OUT OF RANGE WARNING
Obstacles between the handset and the base station will influence the operation
range. When the handset is too far away from the base station, the quality of the con-
nection will deteriorate and you will hear a warning tone. The communication will be
broken automatically if you do not go back into the operation range within 10
s e c o n d s .
If a connection between the handset and the base station is not possible, you will
hear an intermittent warning tone.
8.17. SETTING SPEAKER VOLUME OF THE
HANDSET
The speaker volume of the handset can be set by pressing the buttons and
(silent or loud)
8.18. SETTING RINGING MELODY HANDSET
1 xxxx 1 2
Press 1 to select the ringing melody ( 8 types)
Press 2 to select the speed of the ringing melody ( 16 types).
Press
8.19. SETTING RINGING MELODY BASE STATION
Press the line button
2 xxxx 1 2
Press 1 to select the ringing melody ( 8 types)
Press 2 to select the speed of the ringing melody ( 16 types).
Press
Press the line button again.
9. TROUBLESHOOTING
SPEAKER OF THE HANDSET DOES NOT FUNCTION ANYMORE
(NO SPEAKER VOLUME)
• Check whether the delivered telephone plug has been used.
• Check if the telephone plug has been connected correctly.
THE DISPLAY DOES NOT FUNCTION
• Check if the battery connector has been connected correctly.
• Check if the battery charger contacts are not damaged or dirty.
• Charge the battery via the speed charge procedure as described in point 7.
Battery.
INDICATORS ON THE BASE STATION DO NOT FUNCTION
• Check if the adaptor and the telephone plug have been connected in the
18 19
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Topcom Butler 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Topcom Butler 200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info